Merge pull request #20900 from hrydgard/restore-vsync

Rework the VSync setting and related code to make more sense

Common/GPU/D3D11/thin3d_d3d11.cpp

@@ -161,6 +161,13 @@ public:
 	void BeginFrame(DebugFlags debugFlags) override;
 	void EndFrame() override;
 	void Present(PresentMode presentMode) override;
+	PresentMode GetCurrentPresentMode() const override {
+		if (currentInterval_ == 1) {
+			return PresentMode::FIFO;
+		} else {
+			return PresentMode::IMMEDIATE;
+		}
+	}
 
 	int GetFrameCount() override { return frameCount_; }
 
@@ -272,6 +279,8 @@ private:
 	D3D_FEATURE_LEVEL featureLevel_;
 	std::string adapterDesc_;
 	std::vector<std::string> deviceList_;
+
+	int currentInterval_ = -1;
 };
 
 D3D11DrawContext::D3D11DrawContext(ComPtr<ID3D11Device> device, ComPtr<ID3D11DeviceContext> deviceContext, ComPtr<ID3D11Device1> device1, ComPtr<ID3D11DeviceContext1> deviceContext1, ComPtr<IDXGISwapChain> swapChain, D3D_FEATURE_LEVEL featureLevel, HWND hWnd, std::vector<std::string> deviceList, int maxInflightFrames)
@@ -492,6 +501,7 @@ void D3D11DrawContext::Present(PresentMode presentMode) {
 #endif
 		}
 		swapChain_->Present(interval, flags);
+		currentInterval_ = interval;
 	}
 
 	curRenderTargetView_.Reset();

Common/GPU/OpenGL/thin3d_gl.cpp

@@ -368,6 +368,9 @@ public:
 	void BeginFrame(DebugFlags debugFlags) override;
 	void EndFrame() override;
 	void Present(PresentMode mode) override;
+	PresentMode GetCurrentPresentMode() const override {
+		return requestedPresentMode_;
+	}
 
 	int GetFrameCount() override {
 		return frameCount_;
@@ -527,6 +530,8 @@ private:
 		GLPushBuffer *push;
 	};
 	FrameData frameData_[GLRenderManager::MAX_INFLIGHT_FRAMES]{};
+
+	PresentMode requestedPresentMode_{};
 };
 
 static constexpr int MakeIntelSimpleVer(int v1, int v2, int v3) {
@@ -812,8 +817,22 @@ void OpenGLContext::EndFrame() {
 }
 
 void OpenGLContext::Present(PresentMode presentMode) {
+	_dbg_assert_msg_((caps_.presentModesSupported & presentMode) != 0, "Present mode %d not supported", (int)presentMode);
+
+	// NOTE: renderManager_.SwapInterval has repeat protection: won't call glSwapInterval if the value is the same as current.
+	switch (presentMode) {
+	case PresentMode::IMMEDIATE:
+		renderManager_.SwapInterval(0);
+		break;
+	case PresentMode::FIFO:
+	default:
+		renderManager_.SwapInterval(1);
+		break;
+	}
+
 	renderManager_.Present();
 	frameCount_++;
+	requestedPresentMode_ = presentMode;
 }
 
 void OpenGLContext::Invalidate(InvalidationFlags flags) {

Common/GPU/Vulkan/VulkanContext.cpp

@@ -722,6 +722,7 @@ VkResult VulkanContext::CreateDevice(int physical_device) {
 		VkPhysicalDevicePresentWaitFeaturesKHR presentWaitFeatures{ VK_STRUCTURE_TYPE_PHYSICAL_DEVICE_PRESENT_WAIT_FEATURES_KHR };
 		VkPhysicalDevicePresentIdFeaturesKHR presentIdFeatures{ VK_STRUCTURE_TYPE_PHYSICAL_DEVICE_PRESENT_ID_FEATURES_KHR };
 		VkPhysicalDeviceProvokingVertexFeaturesEXT provokingVertexFeatures{ VK_STRUCTURE_TYPE_PHYSICAL_DEVICE_PROVOKING_VERTEX_FEATURES_EXT };
+		VkPhysicalDevicePresentModeFifoLatestReadyFeaturesKHR presentModeFifoProps{VK_STRUCTURE_TYPE_PHYSICAL_DEVICE_PRESENT_MODE_FIFO_LATEST_READY_FEATURES_KHR};
 
 		ChainStruct(features2, &multiViewFeatures);
 		if (extensionsLookup_.KHR_present_wait) {
@@ -733,6 +734,9 @@ VkResult VulkanContext::CreateDevice(int physical_device) {
 		if (extensionsLookup_.EXT_provoking_vertex) {
 			ChainStruct(features2, &provokingVertexFeatures);
 		}
+		if (extensionsLookup_.KHR_present_mode_fifo_latest_ready) {
+			ChainStruct(features2, &presentModeFifoProps);
+		}
 		vkGetPhysicalDeviceFeatures2(physical_devices_[physical_device_], &features2);
 		deviceFeatures_.available.standard = features2.features;
 		deviceFeatures_.available.multiview = multiViewFeatures;
@@ -745,6 +749,9 @@ VkResult VulkanContext::CreateDevice(int physical_device) {
 		if (extensionsLookup_.EXT_provoking_vertex) {
 			deviceFeatures_.available.provokingVertex = provokingVertexFeatures;
 		}
+		if (extensionsLookup_.KHR_present_mode_fifo_latest_ready) {
+			deviceFeatures_.available.presentModeFifoProps = presentModeFifoProps;
+		}
 	} else {
 		vkGetPhysicalDeviceFeatures(physical_devices_[physical_device_], &deviceFeatures_.available.standard);
 		deviceFeatures_.available.multiview = {};
@@ -784,6 +791,10 @@ VkResult VulkanContext::CreateDevice(int physical_device) {
 	if (extensionsLookup_.EXT_provoking_vertex) {
 		deviceFeatures_.enabled.provokingVertex.provokingVertexLast = true;
 	}
+	deviceFeatures_.enabled.presentModeFifoProps = {VK_STRUCTURE_TYPE_PHYSICAL_DEVICE_PRESENT_MODE_FIFO_LATEST_READY_FEATURES_KHR};
+	if (extensionsLookup_.KHR_present_mode_fifo_latest_ready) {
+		deviceFeatures_.enabled.presentModeFifoProps.presentModeFifoLatestReady = deviceFeatures_.available.presentModeFifoProps.presentModeFifoLatestReady;
+	}
 
 	// deviceFeatures_.enabled.multiview.multiviewGeometryShader = deviceFeatures_.available.multiview.multiviewGeometryShader;
 
@@ -810,6 +821,9 @@ VkResult VulkanContext::CreateDevice(int physical_device) {
 		if (extensionsLookup_.EXT_provoking_vertex) {
 			ChainStruct(features2, &deviceFeatures_.enabled.provokingVertex);
 		}
+		if (extensionsLookup_.KHR_present_mode_fifo_latest_ready) {
+			ChainStruct(features2, &deviceFeatures_.enabled.presentModeFifoProps);
+		}
 	} else {
 		device_info.pEnabledFeatures = &deviceFeatures_.enabled.standard;
 	}
@@ -932,10 +946,10 @@ void VulkanContext::SetDebugNameImpl(uint64_t handle, VkObjectType type, const c
 
 VkResult VulkanContext::InitSurface(WindowSystem winsys, void *data1, void *data2) {
 	winsys_ = winsys;
-	if (winsysData1_ != data1) {
+	if (winsysData1_ != data1 && winsysData1_ != 0) {
 		WARN_LOG(Log::G3D, "winsysData1 changed from %p to %p", winsysData1_, data1);
 	}
-	if (winsysData2_ != data2) {
+	if (winsysData2_ != data2 && winsysData2_ != 0) {
 		WARN_LOG(Log::G3D, "winsysData2 changed from %p to %p", winsysData2_, data2);
 	}
 	winsysData1_ = data1;
@@ -1229,6 +1243,15 @@ VkResult VulkanContext::ReinitSurface() {
 		frame_[i].profiler.Init(this);
 	}
 
+	// Query presentation modes. We need to know which ones are available for InitSwapchain().
+	availablePresentModes_.clear();
+	uint32_t presentModeCount;
+	VkResult res = vkGetPhysicalDeviceSurfacePresentModesKHR(physical_devices_[physical_device_], surface_, &presentModeCount, nullptr);
+	availablePresentModes_.resize(presentModeCount);
+	_dbg_assert_(res == VK_SUCCESS);
+	res = vkGetPhysicalDeviceSurfacePresentModesKHR(physical_devices_[physical_device_], surface_, &presentModeCount, availablePresentModes_.data());
+	_dbg_assert_(res == VK_SUCCESS);
+
 	return VK_SUCCESS;
 }
 
@@ -1366,15 +1389,6 @@ bool VulkanContext::InitSwapchain(VkPresentModeKHR desiredPresentMode) {
 		return true;
 	}
 
-	_dbg_assert_(res == VK_SUCCESS);
-	uint32_t presentModeCount;
-	res = vkGetPhysicalDeviceSurfacePresentModesKHR(physical_devices_[physical_device_], surface_, &presentModeCount, nullptr);
-	_dbg_assert_(res == VK_SUCCESS);
-	VkPresentModeKHR *presentModes = new VkPresentModeKHR[presentModeCount];
-	_dbg_assert_(presentModes);
-	res = vkGetPhysicalDeviceSurfacePresentModesKHR(physical_devices_[physical_device_], surface_, &presentModeCount, presentModes);
-	_dbg_assert_(res == VK_SUCCESS);
-
 	VkExtent2D currentExtent{ surfCapabilities_.currentExtent };
 	// https://registry.khronos.org/vulkan/specs/1.3-extensions/man/html/VkSurfaceCapabilitiesKHR.html
 	// currentExtent is the current width and height of the surface, or the special value (0xFFFFFFFF, 0xFFFFFFFF) indicating that the surface size will be determined by the extent of a swapchain targeting the surface.
@@ -1398,31 +1412,20 @@ bool VulkanContext::InitSwapchain(VkPresentModeKHR desiredPresentMode) {
 		surfCapabilities_.maxImageExtent.width, surfCapabilities_.maxImageExtent.height,
 		swapChainExtent_.width, swapChainExtent_.height);
 
-	availablePresentModes_.clear();
 	// TODO: Find a better way to specify the prioritized present mode while being able
 	// to fall back in a sensible way.
 	VkPresentModeKHR swapchainPresentMode = VK_PRESENT_MODE_MAX_ENUM_KHR;
-	std::string modes = "";
-	for (size_t i = 0; i < presentModeCount; i++) {
-		modes += VulkanPresentModeToString(presentModes[i]);
-		if (i != presentModeCount - 1) {
-			modes += ", ";
-		}
-		availablePresentModes_.push_back(presentModes[i]);
-	}
-
 	// Kind of silly logic now, but at least it performs a final sanity check of the chosen value.
-	for (size_t i = 0; i < presentModeCount; i++) {
-		bool match = presentModes[i] == desiredPresentMode;
+	for (size_t i = 0; i < availablePresentModes_.size(); i++) {
+		bool match = availablePresentModes_[i] == desiredPresentMode;
 		// Default to the first present mode from the list.
 		if (match || swapchainPresentMode == VK_PRESENT_MODE_MAX_ENUM_KHR) {
-			swapchainPresentMode = presentModes[i];
+			swapchainPresentMode = availablePresentModes_[i];
 		}
 		if (match) {
 			break;
 		}
 	}
-	delete[] presentModes;
 	// Determine the number of VkImage's to use in the swap chain (we desire to
 	// own only 1 image at a time, besides the images being displayed and
 	// queued for display):
@@ -1433,6 +1436,14 @@ bool VulkanContext::InitSwapchain(VkPresentModeKHR desiredPresentMode) {
 		desiredNumberOfSwapChainImages = surfCapabilities_.maxImageCount;
 	}
 
+	std::string modes = "";
+	for (size_t i = 0; i < availablePresentModes_.size(); i++) {
+		modes += VulkanPresentModeToString(availablePresentModes_[i]);
+		if (i != availablePresentModes_.size() - 1) {
+			modes += ", ";
+		}
+	}
+
 	INFO_LOG(Log::G3D, "Supported present modes: %s. Chosen present mode: %d (%s). numSwapChainImages: %d (max: %d)",
 		modes.c_str(), swapchainPresentMode, VulkanPresentModeToString(swapchainPresentMode),
 		desiredNumberOfSwapChainImages, surfCapabilities_.maxImageCount);

Common/GPU/Vulkan/VulkanContext.h

@@ -288,6 +288,7 @@ public:
 		VkPhysicalDevicePresentWaitFeaturesKHR presentWait;
 		VkPhysicalDevicePresentIdFeaturesKHR presentId;
 		VkPhysicalDeviceProvokingVertexFeaturesEXT provokingVertex;
+		VkPhysicalDevicePresentModeFifoLatestReadyFeaturesKHR presentModeFifoProps;
 	};
 
 	const PhysicalDeviceProps &GetPhysicalDeviceProperties(int i = -1) const {

Common/GPU/Vulkan/thin3d_vulkan.cpp

@@ -430,10 +430,8 @@ public:
 	PresentMode GetPresentMode() const {
 		switch (vulkan_->GetPresentMode()) {
 		case VK_PRESENT_MODE_FIFO_KHR: return PresentMode::FIFO;
-		case VK_PRESENT_MODE_FIFO_RELAXED_KHR: return PresentMode::FIFO_RELAXED;  // We treat is as FIFO for now (and won't ever enable it anyway...)
 		case VK_PRESENT_MODE_IMMEDIATE_KHR: return PresentMode::IMMEDIATE;
 		case VK_PRESENT_MODE_MAILBOX_KHR: return PresentMode::MAILBOX;
-		case VK_PRESENT_MODE_FIFO_LATEST_READY_KHR: return PresentMode::FIFO_LATEST_READY;
 		default: return PresentMode::FIFO;
 		}
 	}
@@ -503,7 +501,21 @@ public:
 
 	void BeginFrame(DebugFlags debugFlags) override;
 	void EndFrame() override;
+
 	void Present(PresentMode presentMode) override;
+	PresentMode GetCurrentPresentMode() const override {
+		switch (vulkan_->GetPresentMode()) {
+		case VK_PRESENT_MODE_IMMEDIATE_KHR:
+			return PresentMode::IMMEDIATE;
+		case VK_PRESENT_MODE_MAILBOX_KHR:
+			return PresentMode::MAILBOX;
+		case VK_PRESENT_MODE_FIFO_KHR:
+		case VK_PRESENT_MODE_FIFO_RELAXED_KHR:
+		case VK_PRESENT_MODE_FIFO_LATEST_READY_KHR:
+		default:
+			return PresentMode::FIFO;
+		}
+	}
 
 	int GetFrameCount() override {
 		return frameCount_;
@@ -896,6 +908,9 @@ VKContext::VKContext(VulkanContext *vulkan, bool useRenderThread)
 	: vulkan_(vulkan), renderManager_(vulkan, useRenderThread, frameTimeHistory_) {
 	shaderLanguageDesc_.Init(GLSL_VULKAN);
 
+	// Make sure that the surface has been initialized.
+	_dbg_assert_(vulkan->GetAvailablePresentModes().size() > 0);
+
 	caps_.coordConvention = CoordConvention::Vulkan;
 	caps_.setMaxFrameLatencySupported = true;
 	caps_.anisoSupported = vulkan->GetDeviceFeatures().enabled.standard.samplerAnisotropy != 0;
@@ -935,13 +950,12 @@ VKContext::VKContext(VulkanContext *vulkan, bool useRenderThread)
 	caps_.presentMaxInterval = 1;
 	caps_.presentInstantModeChange = false;  // TODO: Fix this with some work in VulkanContext
 	caps_.presentModesSupported = (PresentMode)0;
+
 	for (auto mode : vulkan->GetAvailablePresentModes()) {
 		switch (mode) {
 		case VK_PRESENT_MODE_FIFO_KHR: caps_.presentModesSupported |= PresentMode::FIFO; break;
 		case VK_PRESENT_MODE_IMMEDIATE_KHR: caps_.presentModesSupported |= PresentMode::IMMEDIATE; break;
 		case VK_PRESENT_MODE_MAILBOX_KHR: caps_.presentModesSupported |= PresentMode::MAILBOX; break;
-		case VK_PRESENT_MODE_FIFO_LATEST_READY_KHR: caps_.presentModesSupported |= PresentMode::FIFO_LATEST_READY; break;
-		case VK_PRESENT_MODE_FIFO_RELAXED_KHR: caps_.presentModesSupported |= PresentMode::FIFO_RELAXED; break;
 		default: break;  // Ignore any other modes.
 		}
 	}

Common/GPU/thin3d.h

@@ -582,13 +582,11 @@ enum class PresentMode {
 	FIFO = 1,
 	IMMEDIATE = 2,
 	MAILBOX = 4,
-	FIFO_RELAXED = 8,  // Vulkan only
-	FIFO_LATEST_READY = 16,  // Vulkan only
 };
 ENUM_CLASS_BITOPS(PresentMode);
 
 inline bool PresentationModeBlocks(PresentMode mode) {
-	return mode & (PresentMode::FIFO | PresentMode::FIFO_RELAXED | PresentMode::FIFO_LATEST_READY);
+	return mode & PresentMode::FIFO;
 }
 
 struct DeviceCaps {
@@ -862,6 +860,7 @@ public:
 
 	// Some backends also can't change presentation mode immediately.
 	virtual void Present(PresentMode presentMode) = 0;
+	virtual PresentMode GetCurrentPresentMode() const = 0;
 
 	// This should be avoided as much as possible, in favor of clearing when binding a render target, which is native
 	// on Vulkan.

Common/Render/AtlasGen.cpp

@@ -262,6 +262,9 @@ void Add1PxTransparentBorder(Image &img) {
 			newData[(y + 1) * (img.w + 2) + (x + 1)] = c;
 		}
 	}
+	img.dat = std::move(newData);
+	img.w += 2;
+	img.h += 2;
 }
 
 void AddDropShadow(Image &img, int shadowSize, float intensity) {

Core/Config.cpp

@@ -193,24 +193,6 @@ static bool DefaultCodeGen() {
 #endif
 }
 
-static bool DefaultVSync() {
-#if PPSSPP_PLATFORM(ANDROID) || PPSSPP_PLATFORM(UWP)
-	// Previously we didn't allow turning off vsync/FIFO on Android. Let's set the default accordingly.
-	return true;
-#else
-	return false;
-#endif
-}
-
-static int DefaultVulkanPresentMode() {
-#if PPSSPP_PLATFORM(IOS)
-	// iOS only supports FIFO.
-	return (int)PresentMode::Fifo;
-#else
-	return (int)PresentMode::Mailbox;
-#endif
-}
-
 static bool DefaultEnableStateUndo() {
 #if PPSSPP_PLATFORM(ANDROID) || PPSSPP_PLATFORM(IOS)
 	// Off on mobile to save disk space.
@@ -623,24 +605,6 @@ struct ConfigTranslator {
 
 typedef ConfigTranslator<GPUBackend, GPUBackendToString, GPUBackendFromString> GPUBackendTranslator;
 
-static int FastForwardModeFromString(const std::string &s) {
-	if (!strcasecmp(s.c_str(), "CONTINUOUS"))
-		return (int)FastForwardMode::CONTINUOUS;
-	if (!strcasecmp(s.c_str(), "SKIP_FLIP"))
-		return (int)FastForwardMode::SKIP_FLIP;
-	return DefaultFastForwardMode();
-}
-
-static std::string FastForwardModeToString(int v) {
-	switch (FastForwardMode(v)) {
-	case FastForwardMode::CONTINUOUS:
-		return "CONTINUOUS";
-	case FastForwardMode::SKIP_FLIP:
-		return "SKIP_FLIP";
-	}
-	return "CONTINUOUS";
-}
-
 static std::string DefaultInfrastructureUsername() {
 	// If the user has already picked a Nickname that satisfies the rules and is not "PPSSPP",
 	// let's use that.
@@ -694,7 +658,6 @@ static const ConfigSetting graphicsSettings[] = {
 	ConfigSetting("FrameRate", &g_Config.iFpsLimit1, 0, CfgFlag::PER_GAME),
 	ConfigSetting("FrameRate2", &g_Config.iFpsLimit2, -1, CfgFlag::PER_GAME),
 	ConfigSetting("AnalogFrameRate", &g_Config.iAnalogFpsLimit, 240, CfgFlag::PER_GAME),
-	ConfigSetting("UnthrottlingMode", &g_Config.iFastForwardMode, &DefaultFastForwardMode, &FastForwardModeToString, &FastForwardModeFromString, CfgFlag::PER_GAME),
 #if defined(USING_WIN_UI)
 	ConfigSetting("RestartRequired", &g_Config.bRestartRequired, false, CfgFlag::DONT_SAVE),
 #endif
@@ -737,8 +700,8 @@ static const ConfigSetting graphicsSettings[] = {
 	ConfigSetting("TexScalingType", &g_Config.iTexScalingType, 0, CfgFlag::PER_GAME | CfgFlag::REPORT),
 	ConfigSetting("TexDeposterize", &g_Config.bTexDeposterize, false, CfgFlag::PER_GAME | CfgFlag::REPORT),
 	ConfigSetting("TexHardwareScaling", &g_Config.bTexHardwareScaling, false, CfgFlag::PER_GAME | CfgFlag::REPORT),
-	ConfigSetting("VSync", &g_Config.bVSync, &DefaultVSync, CfgFlag::PER_GAME),
-	ConfigSetting("VulkanPresentMode", &g_Config.iVulkanPresentationMode, &DefaultVulkanPresentMode, CfgFlag::PER_GAME),
+	ConfigSetting("VerticalSync", &g_Config.bVSync, true, CfgFlag::PER_GAME),
+	ConfigSetting("LowLatencyPresent", &g_Config.bLowLatencyPresent, true, CfgFlag::PER_GAME),
 	ConfigSetting("BloomHack", &g_Config.iBloomHack, 0, CfgFlag::PER_GAME | CfgFlag::REPORT),
 
 	// Not really a graphics setting...

Core/Config.h

@@ -169,8 +169,13 @@ public:
 	bool bCameraMirrorHorizontal;
 	int iDisplayFramerateMode;  // enum DisplayFramerateMode. Android-only.
 	int iDisplayRefreshRate = 60;
-	int iVulkanPresentationMode;
+
+	// These two combined choose the presentation mode.
+	// vsync = false: Immediate
+	// vsync = true, low latency present = true: Mailbox
+	// vsync = true, low latency present = false: FIFO
 	bool bVSync;
+	bool bLowLatencyPresent;
 
 	bool bSoftwareRendering;
 	bool bSoftwareRenderingJit;
@@ -203,7 +208,6 @@ public:
 	bool bShowImDebugger;
 
 	int iFrameSkip;
-	int iFastForwardMode; // See FastForwardMode in ConfigValues.h.
 	bool bAutoFrameSkip;
 
 	bool bEnableCardboardVR; // Cardboard Master Switch

Core/ConfigValues.h

@@ -147,16 +147,6 @@ ENUM_CLASS_BITOPS(DisableHLEFlags);
 std::string GPUBackendToString(GPUBackend backend);
 GPUBackend GPUBackendFromString(std::string_view backend);
 
-// Vulkan present modes, linearized. Currently in order of lowest to highest latency, hopefully won't change in the future.
-// NOTE: These values DO NOT match the flags in DrawContext caps - these are not used as a bitfield.
-enum class PresentMode {
-	Immediate = 0,  // VK_PRESENT_MODE_IMMEDIATE_KHR
-	Mailbox = 1,    // VK_PRESENT_MODE_MAILBOX_KHR
-	FifoLatestReady = 2, // VK_PRESENT_MODE_FIFO_LATEST_READY_KHR
-	FifoRelaxed = 3, // VK_PRESENT_MODE_FIFO_RELAXED_KHR
-	Fifo = 4,       // VK_PRESENT_MODE_FIFO_KHR
-};
-
 // For iIOTimingMethod.
 enum IOTimingMethods {
 	IOTIMING_FAST = 0,

Core/FrameTiming.cpp

@@ -22,6 +22,7 @@
 #include "ppsspp_config.h"
 #include "Common/Profiler/Profiler.h"
 #include "Common/Log.h"
+#include "Common/System/Display.h"
 #include "Common/TimeUtil.h"
 
 #include "Core/RetroAchievements.h"
@@ -56,22 +57,6 @@ void WaitUntil(double now, double timestamp, const char *reason) {
 #endif
 }
 
-inline Draw::PresentMode GetBestImmediateMode(Draw::PresentMode supportedModes) {
-	if (supportedModes & Draw::PresentMode::MAILBOX) {
-		return Draw::PresentMode::MAILBOX;
-	} else {
-		return Draw::PresentMode::IMMEDIATE;
-	}
-}
-
-void FrameTiming::Reset(Draw::DrawContext *draw) {
-	if (g_Config.bVSync || !(draw->GetDeviceCaps().presentModesSupported & (Draw::PresentMode::MAILBOX | Draw::PresentMode::IMMEDIATE))) {
-		presentMode = Draw::PresentMode::FIFO;
-	} else {
-		presentMode = GetBestImmediateMode(draw->GetDeviceCaps().presentModesSupported);
-	}
-}
-
 void FrameTiming::DeferWaitUntil(double until, double *curTimePtr) {
 	_dbg_assert_(until > 0.0);
 	waitUntil_ = until;
@@ -89,54 +74,65 @@ void FrameTiming::PostSubmit() {
 	}
 }
 
-Draw::PresentMode ComputePresentMode(Draw::DrawContext *draw) {
-	_assert_(draw);
+void FrameTiming::ComputePresentMode(Draw::DrawContext *draw, bool fastForward) {
+	_dbg_assert_(draw);
+	if (!draw) {
+		fastForwardSkipFlip_ = true;
+		presentMode_ = Draw::PresentMode::FIFO;
+		return;
+	}
 
-	Draw::PresentMode mode = Draw::PresentMode::FIFO;
+	_dbg_assert_(draw->GetDeviceCaps().presentModesSupported != (Draw::PresentMode)0);
 
-	if (draw->GetDeviceCaps().presentModesSupported & (Draw::PresentMode::IMMEDIATE | Draw::PresentMode::MAILBOX)) {
-		// Switch to immediate if desired and possible.
-		bool wantInstant = false;
-		if (!g_Config.bVSync) {
-			wantInstant = true;
+	if (draw->GetDeviceCaps().presentModesSupported == Draw::PresentMode::FIFO) {
+		// Only FIFO mode is supported (like on iOS and some GLES backends).
+		fastForwardSkipFlip_ = true;
+		presentMode_ = Draw::PresentMode::FIFO;
+		return;
+	}
+
+	// More than one present mode is supported. Use careful logic.
+
+	// The user has requested vsync off.
+	if (!g_Config.bVSync) {
+		if (draw->GetDeviceCaps().presentModesSupported & Draw::PresentMode::IMMEDIATE) {
+			// Use immediate mode, whether fast-forwarding or not.
+			presentMode_ = Draw::PresentMode::IMMEDIATE;
+			fastForwardSkipFlip_ = false;
+			return;
 		}
+		// Inconsistent state - vsync is off but immediate mode is not supported.
+		// We will simply force on VSync.
+		g_Config.bVSync = true;
+	}
 
-		if (PSP_CoreParameter().fastForward && NetworkAllowSpeedControl()) {
-			wantInstant = true;
+	// At this point, vsync is always on. What decides now is whether MAILBOX or IMMEDIATE is available,
+	// and also if we need an unsynced mode.
+
+	// OK, vsync is requested (or immediate is not available). If mailbox is supported, it works the same as IMMEDIATE above.
+
+	if (g_Config.bLowLatencyPresent) {
+		// Use mailbox if available. It works fine for both fast-forward and normal.
+		if (draw->GetDeviceCaps().presentModesSupported & Draw::PresentMode::MAILBOX) {
+			presentMode_ = Draw::PresentMode::MAILBOX;
+			fastForwardSkipFlip_ = false;
+			return;
 		}
+		// We could force off lowLatencyPresent here, but it's no good when changing between backends.
+		// So let's leave it on in the background, maybe the user just went from Vulkan to OpenGL.
+	}
 
-		FPSLimit limit = PSP_CoreParameter().fpsLimit;
-		if (!NetworkAllowSpeedControl()) {
-			limit = FPSLimit::NORMAL;
-		}
-
-		if (limit != FPSLimit::NORMAL) {
-			int limit;
-			if (PSP_CoreParameter().fpsLimit == FPSLimit::CUSTOM1)
-				limit = g_Config.iFpsLimit1;
-			else if (PSP_CoreParameter().fpsLimit == FPSLimit::CUSTOM2)
-				limit = g_Config.iFpsLimit2;
-			else
-				limit = PSP_CoreParameter().analogFpsLimit;
-
-			// For an alternative speed that is a clean factor of 60, the user probably still wants vsync.
-			// TODO: Should take the user's display refresh rate into account...
-			if (limit == 0 || (limit >= 0 && limit != 15 && limit != 30 && limit != 60)) {
-				wantInstant = true;
-			}
-		}
-
-		if (wantInstant && g_Config.bVSync && !draw->GetDeviceCaps().presentInstantModeChange) {
-			// If in vsync mode (which will be FIFO), and the backend can't switch immediately,
-			// stick to FIFO.
-			wantInstant = false;
-		}
-
-		// The outer if checks that instant modes are available.
-		if (wantInstant) {
-			mode = GetBestImmediateMode(draw->GetDeviceCaps().presentModesSupported);
+	// At this point, low-latency mode is not available, and vsync is on. We see if we can use INSTANT
+	// mode for fast-forwarding, or if we need to resort to frameskipping.
+	if (draw->GetDeviceCaps().presentInstantModeChange) {
+		if (fastForward) {
+			presentMode_ = Draw::PresentMode::IMMEDIATE;
+			fastForwardSkipFlip_ = false;
+			return;
 		}
 	}
 
-	return mode;
+	// Finally, fallback to FIFO mode, with skip-flip in fast-forward.
+	presentMode_ = Draw::PresentMode::FIFO;
+	fastForwardSkipFlip_ = true;
 }

Core/FrameTiming.h

@@ -12,18 +12,25 @@ class FrameTiming {
 public:
 	void DeferWaitUntil(double until, double *curTimePtr);
 	void PostSubmit();
-	void Reset(Draw::DrawContext *draw);
+	void ComputePresentMode(Draw::DrawContext *draw, bool fastForward);
 
-	// Some backends won't allow changing this willy nilly.
-	Draw::PresentMode presentMode;
+	bool FastForwardNeedsSkipFlip() const {
+		return fastForwardSkipFlip_;
+	}
+	Draw::PresentMode PresentMode() const {
+		return presentMode_;
+	}
 
 private:
+	// For use on the next Present. These two are set by ComputePresentMode.
+	Draw::PresentMode presentMode_;
+	bool fastForwardSkipFlip_;
+
 	double waitUntil_;
 	double *curTimePtr_;
 };
 
 extern FrameTiming g_frameTiming;
 
-Draw::PresentMode ComputePresentMode(Draw::DrawContext *draw);
 
 void WaitUntil(double now, double timestamp, const char *reason);

Core/HLE/sceDisplay.cpp

@@ -580,22 +580,6 @@ void __DisplayFlip(int cyclesLate) {
 
 	bool duplicateFrames = g_Config.bRenderDuplicateFrames && g_Config.iFrameSkip == 0;
 
-	bool fastForwardSkipFlip = g_Config.iFastForwardMode != (int)FastForwardMode::CONTINUOUS;
-
-	Draw::DrawContext *draw = gpu->GetDrawContext();
-	if (draw) {
-		g_frameTiming.presentMode = ComputePresentMode(draw);
-		if (!draw->GetDeviceCaps().presentInstantModeChange && g_frameTiming.presentMode == Draw::PresentMode::FIFO) {
-			// Some backends can't just flip into MAILBOX/IMMEDIATE mode instantly.
-			// Vulkan doesn't support the interval setting, so we force skipping the flip.
-			// TODO: We'll clean this up in a more backend-independent way later.
-			fastForwardSkipFlip = true;
-		}
-	} else {
-		// Surely can never get here?
-		g_frameTiming.presentMode = Draw::PresentMode::FIFO;
-	}
-
 	if (!g_Config.bSkipBufferEffects) {
 		postEffectRequiresFlip = duplicateFrames || g_Config.bShaderChainRequires60FPS;
 	}
@@ -606,11 +590,14 @@ void __DisplayFlip(int cyclesLate) {
 
 	const bool fbDirty = gpu->FramebufferDirty();
 
+	Draw::DrawContext *draw = gpu->GetDrawContext();
+
 	bool needFlip = fbDirty || noRecentFlip || postEffectRequiresFlip;
 	if (!needFlip) {
 		// Okay, there's no new frame to draw, game might be sitting in a static loading screen
 		// or similar, and not long enough to trigger noRecentFlip. But audio may be playing, so we need to time still.
 		DoFrameIdleTiming();
+		g_frameTiming.ComputePresentMode(draw, false);
 		return;
 	}
 
@@ -624,10 +611,16 @@ void __DisplayFlip(int cyclesLate) {
 	bool forceNoFlip = false;
 	float refreshRate = System_GetPropertyFloat(SYSPROP_DISPLAY_REFRESH_RATE);
 	// Avoid skipping on devices that have 58 or 59 FPS, except when alternate speed is set.
-	bool refreshRateNeedsSkip = FrameTimingLimit() != framerate && FrameTimingLimit() > refreshRate;
+	const double fpsLimit = FrameTimingLimit();
+	bool throttle = fpsLimit != 0.0;
+
+	bool refreshRateNeedsSkip = fpsLimit != framerate && fpsLimit > refreshRate || !throttle;
+
+	g_frameTiming.ComputePresentMode(draw, refreshRateNeedsSkip);
+
 	// Alternative to frameskip fast-forward, where we draw everything.
 	// Useful if skipping a frame breaks graphics or for checking drawing speed.
-	if (fastForwardSkipFlip && (!FrameTimingThrottled() || refreshRateNeedsSkip)) {
+	if (g_frameTiming.FastForwardNeedsSkipFlip() && (!FrameTimingThrottled() || refreshRateNeedsSkip)) {
 		static double lastFlip = 0;
 		double now = time_now_d();
 		if ((now - lastFlip) < 1.0f / refreshRate) {
@@ -662,9 +655,6 @@ void __DisplayFlip(int cyclesLate) {
 		gpuStats.numFlips++;
 	}
 
-	bool throttle = FrameTimingThrottled();
-
-	int fpsLimit = FrameTimingLimit();
 	float scaledTimestep = (float)numVBlanksSinceFlip * timePerVblank;
 	if (fpsLimit > 0 && fpsLimit != framerate) {
 		scaledTimestep *= (float)framerate / fpsLimit;

GPU/Vulkan/VulkanUtil.cpp

@@ -21,6 +21,7 @@
 #include "Common/GPU/Vulkan/VulkanContext.h"
 #include "Common/Data/Text/Parsers.h"
 #include "Core/Config.h"
+#include "Core/FrameTiming.h"
 #include "GPU/Vulkan/VulkanUtil.h"
 
 #ifdef _DEBUG
@@ -36,18 +37,15 @@ const VkComponentMapping VULKAN_1555_SWIZZLE = { VK_COMPONENT_SWIZZLE_B, VK_COMP
 const VkComponentMapping VULKAN_565_SWIZZLE = { VK_COMPONENT_SWIZZLE_B, VK_COMPONENT_SWIZZLE_IDENTITY, VK_COMPONENT_SWIZZLE_R, VK_COMPONENT_SWIZZLE_IDENTITY };
 const VkComponentMapping VULKAN_8888_SWIZZLE = { VK_COMPONENT_SWIZZLE_IDENTITY, VK_COMPONENT_SWIZZLE_IDENTITY, VK_COMPONENT_SWIZZLE_IDENTITY, VK_COMPONENT_SWIZZLE_IDENTITY };
 
-VkPresentModeKHR ConfigPresentModeToVulkan() {
-	PresentMode presentMode = (PresentMode)g_Config.iVulkanPresentationMode;
+VkPresentModeKHR ConfigPresentModeToVulkan(Draw::DrawContext *draw) {
+	g_frameTiming.ComputePresentMode(draw, false);
+	Draw::PresentMode presentMode = g_frameTiming.PresentMode();
 	switch (presentMode) {
-	case PresentMode::Immediate:
+	case Draw::PresentMode::IMMEDIATE:
 		return VK_PRESENT_MODE_IMMEDIATE_KHR;
-	case PresentMode::Mailbox:
+	case Draw::PresentMode::MAILBOX:
 		return VK_PRESENT_MODE_MAILBOX_KHR;
-	case PresentMode::FifoLatestReady:
-		return VK_PRESENT_MODE_FIFO_LATEST_READY_KHR;
-	case PresentMode::FifoRelaxed:
-		return VK_PRESENT_MODE_FIFO_RELAXED_KHR;
-	case PresentMode::Fifo:
+	case Draw::PresentMode::FIFO:
 	default:
 		return VK_PRESENT_MODE_FIFO_KHR;
 	}

GPU/Vulkan/VulkanUtil.h

@@ -89,5 +89,5 @@ private:
 
 VkShaderModule CompileShaderModule(VulkanContext *vulkan, VkShaderStageFlagBits stage, const char *code, std::string *error);
 
-VkPresentModeKHR ConfigPresentModeToVulkan();
+VkPresentModeKHR ConfigPresentModeToVulkan(Draw::DrawContext *draw);
 void InitVulkanCreateInfoFromConfig(VulkanContext::CreateInfo *info);

SDL/SDLVulkanGraphicsContext.cpp

@@ -128,18 +128,19 @@ bool SDLVulkanGraphicsContext::Init(SDL_Window *&window, int x, int y, int w, in
 		break;
 	}
 
-	VkPresentModeKHR presentMode = ConfigPresentModeToVulkan();
+	bool useMultiThreading = g_Config.bRenderMultiThreading;
+	if (g_Config.iInflightFrames == 1) {
+		useMultiThreading = false;
+	}
+	draw_ = Draw::T3DCreateVulkanContext(vulkan_, useMultiThreading);
+
+	VkPresentModeKHR presentMode = ConfigPresentModeToVulkan(draw_);
 	if (!vulkan_->InitSwapchain(presentMode)) {
 		*error_message = vulkan_->InitError();
 		Shutdown();
 		return false;
 	}
 
-	bool useMultiThreading = g_Config.bRenderMultiThreading;
-	if (g_Config.iInflightFrames == 1) {
-		useMultiThreading = false;
-	}
-	draw_ = Draw::T3DCreateVulkanContext(vulkan_, useMultiThreading);
 	SetGPUBackend(GPUBackend::VULKAN);
 	bool success = draw_->CreatePresets();
 	_assert_(success);
@@ -170,7 +171,7 @@ void SDLVulkanGraphicsContext::Resize() {
 	// NOTE: Removing DestroySwapchain here causes a double re-create on MacOS with MoltenVK, for some reason.
 	// It's like passing on oldSwapchain doesn't really work as expected.
 	vulkan_->DestroySwapchain();
-	VkPresentModeKHR presentMode = ConfigPresentModeToVulkan();
+	VkPresentModeKHR presentMode = ConfigPresentModeToVulkan(draw_);
 	vulkan_->InitSwapchain(presentMode);
 	draw_->HandleEvent(Draw::Event::GOT_BACKBUFFER, vulkan_->GetBackbufferWidth(), vulkan_->GetBackbufferHeight());
 }

Tools/langtool/Cargo.lock

@@ -84,9 +84,9 @@ checksum = "bef38d45163c2f1dde094a7dfd33ccf595c92905c8f8f4fdc18d06fb1037718a"
 
 [[package]]
 name = "bitflags"
-version = "2.9.4"
+version = "2.10.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "2261d10cca569e4643e526d8dc2e62e433cc8aba21ab764233731f8d369bf394"
+checksum = "812e12b5285cc515a9c72a5c1d3b6d46a19dac5acfef5265968c166106e31dd3"
 
 [[package]]
 name = "block"
@@ -153,7 +153,7 @@ dependencies = [
  "heck",
  "proc-macro2",
  "quote",
- "syn 2.0.106",
+ "syn 2.0.107",
 ]
 
 [[package]]
@@ -228,7 +228,7 @@ checksum = "97369cbbc041bc366949bc74d34658d6cda5621039731c6310521892a3a20ae0"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.106",
+ "syn 2.0.107",
 ]
 
 [[package]]
@@ -663,9 +663,9 @@ dependencies = [
 
 [[package]]
 name = "indexmap"
-version = "2.11.4"
+version = "2.12.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "4b0f83760fb341a774ed326568e19f5a863af4a952def8c39f9ab92fd95b88e5"
+checksum = "6717a8d2a5a929a1a2eb43a12812498ed141a0bcfb7e8f7844fbdbe4303bba9f"
 dependencies = [
  "equivalent",
  "hashbrown",
@@ -783,13 +783,13 @@ checksum = "68354c5c6bd36d73ff3feceb05efa59b6acb7626617f4962be322a825e61f79a"
 
 [[package]]
 name = "mio"
-version = "1.0.4"
+version = "1.1.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "78bed444cc8a2160f01cbcf811ef18cac863ad68ae8ca62092e8db51d51c761c"
+checksum = "69d83b0086dc8ecf3ce9ae2874b2d1290252e2a30720bea58a5c6639b0092873"
 dependencies = [
  "libc",
  "wasi",
- "windows-sys 0.59.0",
+ "windows-sys 0.61.2",
 ]
 
 [[package]]
@@ -878,7 +878,7 @@ version = "0.10.74"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "24ad14dd45412269e1a30f52ad8f0664f0f4f4a89ee8fe28c3b3527021ebb654"
 dependencies = [
- "bitflags 2.9.4",
+ "bitflags 2.10.0",
  "cfg-if",
  "foreign-types",
  "libc",
@@ -895,7 +895,7 @@ checksum = "a948666b637a0f465e8564c73e89d4dde00d72d4d473cc972f390fc3dcee7d9c"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.106",
+ "syn 2.0.107",
 ]
 
 [[package]]
@@ -1055,7 +1055,7 @@ version = "1.1.2"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "cd15f8a2c5551a84d56efdc1cd049089e409ac19a3072d5037a17fd70719ff3e"
 dependencies = [
- "bitflags 2.9.4",
+ "bitflags 2.10.0",
  "errno",
  "libc",
  "linux-raw-sys",
@@ -1064,9 +1064,9 @@ dependencies = [
 
 [[package]]
 name = "rustls"
-version = "0.23.32"
+version = "0.23.33"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "cd3c25631629d034ce7cd9940adc9d45762d46de2b0f57193c4443b92c6d4d40"
+checksum = "751e04a496ca00bb97a5e043158d23d66b5aabf2e1d5aa2a0aaebb1aafe6f82c"
 dependencies = [
  "once_cell",
  "rustls-pki-types",
@@ -1122,7 +1122,7 @@ version = "2.11.1"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "897b2245f0b511c87893af39b033e5ca9cce68824c4d7e7630b5a1d339658d02"
 dependencies = [
- "bitflags 2.9.4",
+ "bitflags 2.10.0",
  "core-foundation",
  "core-foundation-sys",
  "libc",
@@ -1166,7 +1166,7 @@ checksum = "d540f220d3187173da220f885ab66608367b6574e925011a9353e4badda91d79"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.106",
+ "syn 2.0.107",
 ]
 
 [[package]]
@@ -1259,9 +1259,9 @@ dependencies = [
 
 [[package]]
 name = "syn"
-version = "2.0.106"
+version = "2.0.107"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "ede7c438028d4436d71104916910f5bb611972c5cfd7f89b8300a8186e6fada6"
+checksum = "2a26dbd934e5451d21ef060c018dae56fc073894c5a7896f882928a76e6d081b"
 dependencies = [
  "proc-macro2",
  "quote",
@@ -1285,7 +1285,7 @@ checksum = "728a70f3dbaf5bab7f0c4b1ac8d7ae5ea60a4b5549c8a5914361c99147a709d2"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.106",
+ "syn 2.0.107",
 ]
 
 [[package]]
@@ -1294,7 +1294,7 @@ version = "0.6.1"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "3c879d448e9d986b661742763247d3693ed13609438cf3d006f51f5368a5ba6b"
 dependencies = [
- "bitflags 2.9.4",
+ "bitflags 2.10.0",
  "core-foundation",
  "system-configuration-sys",
 ]
@@ -1339,7 +1339,7 @@ checksum = "4fee6c4efc90059e10f81e6d42c60a18f76588c3d74cb83a0b242a2b6c7504c1"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.106",
+ "syn 2.0.107",
 ]
 
 [[package]]
@@ -1420,7 +1420,7 @@ version = "0.6.6"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "adc82fd73de2a9722ac5da747f12383d2bfdb93591ee6c58486e0097890f05f2"
 dependencies = [
- "bitflags 2.9.4",
+ "bitflags 2.10.0",
  "bytes",
  "futures-util",
  "http",
@@ -1570,7 +1570,7 @@ dependencies = [
  "log",
  "proc-macro2",
  "quote",
- "syn 2.0.106",
+ "syn 2.0.107",
  "wasm-bindgen-shared",
 ]
 
@@ -1605,7 +1605,7 @@ checksum = "9f07d2f20d4da7b26400c9f4a0511e6e0345b040694e8a75bd41d578fa4421d7"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.106",
+ "syn 2.0.107",
  "wasm-bindgen-backend",
  "wasm-bindgen-shared",
 ]
@@ -1769,15 +1769,6 @@ dependencies = [
  "windows-targets 0.52.6",
 ]
 
-[[package]]
-name = "windows-sys"
-version = "0.59.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "1e38bc4d79ed67fd075bcc251a1c39b32a1776bbe92e5bef1f0bf1f8c531853b"
-dependencies = [
- "windows-targets 0.52.6",
-]
-
 [[package]]
 name = "windows-sys"
 version = "0.60.2"
@@ -2012,7 +2003,7 @@ checksum = "38da3c9736e16c5d3c8c597a9aaa5d1fa565d0532ae05e27c24aa62fb32c0ab6"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.106",
+ "syn 2.0.107",
  "synstructure",
 ]
 
@@ -2033,7 +2024,7 @@ checksum = "d71e5d6e06ab090c67b5e44993ec16b72dcbaabc526db883a360057678b48502"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.106",
+ "syn 2.0.107",
  "synstructure",
 ]
 
@@ -2073,5 +2064,5 @@ checksum = "5b96237efa0c878c64bd89c436f661be4e46b2f3eff1ebb976f7ef2321d2f58f"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.106",
+ "syn 2.0.107",
 ]

UI/DebugOverlay.cpp

@@ -132,14 +132,19 @@ static void DrawFrameTiming(UIContext *ctx, const Bounds &bounds) {
 
 	char statBuf[1024]{};
 
+	Draw::DrawContext *draw = ctx->GetDrawContext();
+
 	ctx->Flush();
 	ctx->BindFontTexture();
 	ctx->Draw()->SetFontScale(0.5f, 0.5f);
 
 	// NOTE: This is not necessarily the same as the actual present mode.
 	snprintf(statBuf, sizeof(statBuf),
-		"Timing mode (interval): %s",
-		Draw::PresentModeToString(g_frameTiming.presentMode));
+		"Presentation mode: %s Needs skip: %s\n"
+		"Actual presentation mode: %s",
+		Draw::PresentModeToString(g_frameTiming.PresentMode()),
+		g_frameTiming.FastForwardNeedsSkipFlip() ? "true" : "false"),
+		Draw::PresentModeToString(draw->GetCurrentPresentMode());
 
 	ctx->Draw()->DrawTextRect(ubuntu24, statBuf, bounds.x + 10, bounds.y + 50, bounds.w - 20, bounds.h - 30, 0xFFFFFFFF, FLAG_DYNAMIC_ASCII);
 

UI/DeveloperToolsScreen.cpp

@@ -468,11 +468,6 @@ void DeveloperToolsScreen::CreateGraphicsTab(UI::LinearLayout *list) {
 	list->Add(new CheckBox(&g_Config.bVendorBugChecksEnabled, dev->T("Enable driver bug workarounds")));
 	list->Add(new CheckBox(&g_Config.bShaderCache, dev->T("Enable shader cache")));
 
-	static const char *ffModes[] = { "Render all frames", "", "Frame Skipping" };
-	PopupMultiChoice *ffMode = list->Add(new PopupMultiChoice(&g_Config.iFastForwardMode, dev->T("Fast-forward mode"), ffModes, 0, ARRAY_SIZE(ffModes), I18NCat::GRAPHICS, screenManager()));
-	ffMode->SetEnabledFunc([]() { return !g_Config.bVSync; });
-	ffMode->HideChoice(1);  // not used
-
 	auto displayRefreshRate = list->Add(new PopupSliderChoice(&g_Config.iDisplayRefreshRate, 60, 1000, 60, dev->T("Display refresh rate"), 1, screenManager()));
 	displayRefreshRate->SetFormat(si->T("%d Hz"));
 

UI/GameSettingsScreen.cpp

@@ -355,6 +355,10 @@ void GameSettingsScreen::CreateGraphicsSettings(UI::ViewGroup *graphicsSettings)
 	}
 #endif
 
+	graphicsSettings->Add(new CheckBox(&g_Config.bReplaceTextures, dev->T("Replace textures")));
+
+	graphicsSettings->Add(new ItemHeader(gr->T("Display")));
+
 	if (deviceType != DEVICE_TYPE_VR) {
 #if !defined(MOBILE_DEVICE)
 		graphicsSettings->Add(new CheckBox(&g_Config.bFullScreen, gr->T("FullScreen", "Full Screen")))->OnClick.Handle(this, &GameSettingsScreen::OnFullscreenChange);
@@ -367,59 +371,6 @@ void GameSettingsScreen::CreateGraphicsSettings(UI::ViewGroup *graphicsSettings)
 		}
 #endif
 
-	if (GetGPUBackend() == GPUBackend::VULKAN) {
-		// In Vulkan, we can now explicitly let the user choose the presentation mode.
-		static const char *presentationModes[] = {
-			"Immediate (lower latency, tearing)",
-			"Mailbox (lower latency, recommended)",
-			"FIFO: latest ready",
-			"FIFO: relaxed",
-			"FIFO (higher latency, framerate stability)",
-		};
-
-		// If only one mode is supported (like FIFO on iOS), no need to show the option.
-		if (CountSetBits((u32)draw->GetDeviceCaps().presentModesSupported) > 1) {
-			UI::PopupMultiChoice *presentationMode = graphicsSettings->Add(new PopupMultiChoice(&g_Config.iVulkanPresentationMode, gr->T("Frame presentation mode"), presentationModes, 0, ARRAY_SIZE(presentationModes), I18NCat::GRAPHICS, screenManager()));
-			presentationMode->SetChoiceIcon(0, ImageID("I_WARNING"));
-			if (!(draw->GetDeviceCaps().presentModesSupported & Draw::PresentMode::IMMEDIATE)) {
-				presentationMode->HideChoice(0);
-			}
-			if (!(draw->GetDeviceCaps().presentModesSupported & Draw::PresentMode::MAILBOX)) {
-				presentationMode->HideChoice(1);
-			}
-			if (!(draw->GetDeviceCaps().presentModesSupported & Draw::PresentMode::FIFO_LATEST_READY)) {
-				presentationMode->HideChoice(2);
-			}
-			if (!(draw->GetDeviceCaps().presentModesSupported & Draw::PresentMode::FIFO_RELAXED)) {
-				presentationMode->HideChoice(3);
-			}
-			if (!(draw->GetDeviceCaps().presentModesSupported & Draw::PresentMode::FIFO)) {
-				presentationMode->HideChoice(4);
-			}
-
-			// Force the setting to a good supported mode if the current one is not supported, otherwise this will look weird.
-			if (presentationMode->IsChoiceHidden(g_Config.iVulkanPresentationMode)) {
-				if (draw->GetDeviceCaps().presentModesSupported & Draw::PresentMode::MAILBOX) {
-					g_Config.iVulkanPresentationMode = (int)Draw::PresentMode::MAILBOX;
-				} else if (draw->GetDeviceCaps().presentModesSupported & Draw::PresentMode::FIFO) {
-					g_Config.iVulkanPresentationMode = (int)Draw::PresentMode::FIFO;
-				}
-			}
-
-			presentationMode->OnChoice.Add([=](EventParams &e) {
-				NativeResized();
-			});
-		}
-	} else {
-		// All backends support FIFO. Check if any immediate modes are supported, if so we can allow the user to choose.
-		if (draw->GetDeviceCaps().presentModesSupported & (Draw::PresentMode::IMMEDIATE | Draw::PresentMode::MAILBOX)) {
-			CheckBox *vSync = graphicsSettings->Add(new CheckBox(&g_Config.bVSync, gr->T("VSync")));
-			vSync->OnClick.Add([=](EventParams &e) {
-				NativeResized();
-			});
-		}
-	}
-
 #if PPSSPP_PLATFORM(ANDROID)
 		// Hide Immersive Mode on pre-kitkat Android
 		if (System_GetPropertyInt(SYSPROP_SYSTEMVERSION) >= 19) {
@@ -434,7 +385,27 @@ void GameSettingsScreen::CreateGraphicsSettings(UI::ViewGroup *graphicsSettings)
 		});
 	}
 
-	graphicsSettings->Add(new CheckBox(&g_Config.bReplaceTextures, dev->T("Replace textures")));
+	// If only one mode is supported (like FIFO on iOS), no need to show the options.
+	if (CountSetBits((u32)draw->GetDeviceCaps().presentModesSupported) > 1) {
+		// Immediate means non-synchronized, tearing.
+		if (draw->GetDeviceCaps().presentModesSupported & Draw::PresentMode::IMMEDIATE) {
+			CheckBox *vSync = graphicsSettings->Add(new CheckBox(&g_Config.bVSync, gr->T("VSync")));
+			vSync->OnClick.Add([=](EventParams &e) {
+				NativeResized();  // TODO: Remove
+			});
+		}
+		if (draw->GetDeviceCaps().presentModesSupported & Draw::PresentMode::MAILBOX) {
+			CheckBox *lowLatency = graphicsSettings->Add(new CheckBox(&g_Config.bLowLatencyPresent, gr->T("Low latency display")));
+			lowLatency->OnClick.Add([=](EventParams &e) {
+				NativeResized();  // TODO: Remove
+			});
+
+			// If the immediate mode is supported, we can tie low latency present to VSync.
+			if (draw->GetDeviceCaps().presentModesSupported & Draw::PresentMode::IMMEDIATE) {
+				lowLatency->SetEnabledPtr(&g_Config.bVSync);
+			}
+		}
+	}
 
 	graphicsSettings->Add(new ItemHeader(gr->T("Frame Rate Control")));
 	static const char *frameSkip[] = {"Off", "1", "2", "3", "4", "5", "6", "7", "8"};

UI/NativeApp.cpp

@@ -1179,7 +1179,8 @@ void NativeFrame(GraphicsContext *graphicsContext) {
 	if (g_Config.bGpuLogProfiler)
 		debugFlags |= Draw::DebugFlags::PROFILE_SCOPES;
 
-	g_frameTiming.Reset(g_draw);
+	// Can be overridden by sceDisplay which may pass true for the second argument.
+	g_frameTiming.ComputePresentMode(g_draw, false);
 
 	g_draw->BeginFrame(debugFlags);
 
@@ -1206,8 +1207,7 @@ void NativeFrame(GraphicsContext *graphicsContext) {
 		ClearFailedGPUBackends();
 	}
 
-	Draw::PresentMode presentMode = ComputePresentMode(g_draw);
-	g_draw->Present(presentMode);
+	g_draw->Present(g_frameTiming.PresentMode());
 
 	if (resized) {
 		INFO_LOG(Log::G3D, "Resized flag set - recalculating bounds");

Windows/GPU/WindowsVulkanContext.cpp

@@ -52,6 +52,7 @@
 #include "Core/Config.h"
 #include "Core/ConfigValues.h"
 #include "Core/System.h"
+#include "Core/FrameTiming.h"
 #include "Common/GPU/Vulkan/VulkanLoader.h"
 #include "Common/GPU/Vulkan/VulkanContext.h"
 
@@ -117,19 +118,20 @@ bool WindowsVulkanContext::Init(HINSTANCE hInst, HWND hWnd, std::string *error_m
 
 	vulkan_->InitSurface(WINDOWSYSTEM_WIN32, (void *)hInst, (void *)hWnd);
 
-	VkPresentModeKHR presentMode = ConfigPresentModeToVulkan();
-	if (!vulkan_->InitSwapchain(presentMode)) {
-		*error_message = vulkan_->InitError();
-		Shutdown();
-		return false;
-	}
-
 	bool useMultiThreading = g_Config.bRenderMultiThreading;
 	if (g_Config.iInflightFrames == 1) {
 		useMultiThreading = false;
 	}
 
 	draw_ = Draw::T3DCreateVulkanContext(vulkan_, useMultiThreading);
+
+	VkPresentModeKHR presentMode = ConfigPresentModeToVulkan(draw_);
+	if (!vulkan_->InitSwapchain(presentMode)) {
+		*error_message = vulkan_->InitError();
+		Shutdown();
+		return false;
+	}
+
 	SetGPUBackend(GPUBackend::VULKAN, vulkan_->GetPhysicalDeviceProperties(deviceNum).properties.deviceName);
 	bool success = draw_->CreatePresets();
 	_assert_msg_(success, "Failed to compile preset shaders");
@@ -166,7 +168,7 @@ void WindowsVulkanContext::Shutdown() {
 
 void WindowsVulkanContext::Resize() {
 	draw_->HandleEvent(Draw::Event::LOST_BACKBUFFER, vulkan_->GetBackbufferWidth(), vulkan_->GetBackbufferHeight());
-	VkPresentModeKHR presentMode = ConfigPresentModeToVulkan();
+	VkPresentModeKHR presentMode = ConfigPresentModeToVulkan(draw_);
 	vulkan_->InitSwapchain(presentMode);
 	draw_->HandleEvent(Draw::Event::GOT_BACKBUFFER, vulkan_->GetBackbufferWidth(), vulkan_->GetBackbufferHeight());
 }

android/jni/AndroidVulkanContext.cpp

@@ -70,14 +70,15 @@ bool AndroidVulkanContext::InitFromRenderThread(ANativeWindow *wnd, int desiredB
 		return false;
 	}
 
-	VkPresentModeKHR presentMode = ConfigPresentModeToVulkan();
+	bool useMultiThreading = g_Config.bRenderMultiThreading;
+	if (g_Config.iInflightFrames == 1) {
+		useMultiThreading = false;
+	}
+	draw_ = Draw::T3DCreateVulkanContext(g_Vulkan, useMultiThreading);
+
+	VkPresentModeKHR presentMode = ConfigPresentModeToVulkan(draw_);
 	bool success = false;
 	if (g_Vulkan->InitSwapchain(presentMode)) {
-		bool useMultiThreading = g_Config.bRenderMultiThreading;
-		if (g_Config.iInflightFrames == 1) {
-			useMultiThreading = false;
-		}
-		draw_ = Draw::T3DCreateVulkanContext(g_Vulkan, useMultiThreading);
 		SetGPUBackend(GPUBackend::VULKAN);
 		success = draw_->CreatePresets();  // Doesn't fail, we ship the compiler.
 		_assert_msg_(success, "Failed to compile preset shaders");
@@ -128,7 +129,7 @@ void AndroidVulkanContext::Resize() {
 	g_Vulkan->DestroySurface();
 	g_Vulkan->ReinitSurface();
 
-	VkPresentModeKHR presentMode = ConfigPresentModeToVulkan();
+	VkPresentModeKHR presentMode = ConfigPresentModeToVulkan(draw_);
 	g_Vulkan->InitSwapchain(presentMode);
 	draw_->HandleEvent(Draw::Event::GOT_BACKBUFFER, g_Vulkan->GetBackbufferWidth(), g_Vulkan->GetBackbufferHeight());
 	INFO_LOG(Log::G3D, "AndroidVulkanContext::Resize end (final size: %dx%d)", g_Vulkan->GetBackbufferWidth(), g_Vulkan->GetBackbufferHeight());

assets/lang/ar_AE.ini

@@ -320,7 +320,6 @@ Enable Logging = ‎تفعيل سجل التصحيح
 Enable shader cache = Enable shader cache
 Enter address = ‎أدخل العنوان
 Fast = Fast
-Fast-forward mode = Fast-forward mode
 FPU = FPU
 Fragment = Fragment
 Frame timing = Frame timing
@@ -652,6 +651,7 @@ Device = Device
 Direct3D 11 = Direct3D 11
 Disable culling = Disable culling
 Disabled = Disabled
+Display = عرض
 Display layout & effects = ‎أظهر مُعدل النسق
 Display Resolution (HW scaler) = Display resolution (HW scaler)
 Driver requires Android API version %1, current is %2 = Driver requires Android API version %1, current is %2
@@ -687,6 +687,7 @@ Lazy texture caching Tip = Faster, but can cause text problems in a few games
 Lens flare occlusion = Lens flare occlusion
 Linear = ‎خطي
 Low = ‎منخفض
+Low latency display = عرض تأخير منخفض
 LowCurves = Spline/Bezier curves quality
 LowCurves Tip = ‎فقط يستخدم من بعض الألعاب, يتحكم بنعومة المنحنيات
 Lower resolution for effects (reduces artifacts) = Lower resolution for effects (reduces artifacts)

assets/lang/az_AZ.ini

@@ -312,7 +312,6 @@ Enable Logging = Enable debug logging
 Enable shader cache = Enable shader cache
 Enter address = Enter address
 Fast = Fast
-Fast-forward mode = Fast-forward mode
 FPU = FPU
 Fragment = Fragment
 Frame timing = Frame timing
@@ -644,6 +643,7 @@ Device = Device
 Direct3D 11 = Direct3D 11
 Disable culling = Disable culling
 Disabled = Disabled
+Display = Ekran
 Display layout & effects = Display layout & effects
 Display Resolution (HW scaler) = Display resolution (HW scaler)
 Driver requires Android API version %1, current is %2 = Driver requires Android API version %1, current is %2
@@ -679,6 +679,7 @@ Lazy texture caching Tip = Faster, but can cause text problems in a few games
 Lens flare occlusion = Lens flare occlusion
 Linear = Linear
 Low = Low
+Low latency display = Aşağı gecikmə ekranı
 LowCurves = Spline/Bezier curves quality
 LowCurves Tip = Only used by some games, controls smoothness of curves
 Lower resolution for effects (reduces artifacts) = Lower resolution for effects (reduces artifacts)

assets/lang/be_BY.ini

@@ -314,7 +314,6 @@ Enable Logging = Уключыць журнал адладкі
 Enable shader cache = Enable shader cache
 Enter address = Увядзіце адрас
 Fast = Fast
-Fast-forward mode = Рэжым хуткай перамоткі наперад
 Fragment = Фрагмент
 FPU = FPU
 Framedump tests = Тэсты дампаў кадраў
@@ -627,6 +626,7 @@ CPU texture upscaler (slow) = Тып маштабавання
 Current GPU driver = Бягучы драйвер ГП
 Default GPU driver = Стандартны драйвер ГП
 Disable culling = Disable culling
+Display = Дисплей
 Display layout & effects = Размяшчэнне экрана і эфекты
 Driver requires Android API version %1, current is %2 = Driver requires Android API version %1, current is %2
 Drivers = Драйверы
@@ -679,6 +679,7 @@ Lazy texture caching Tip = Faster, but can cause text problems in a few games
 Lens flare occlusion = Аклюзія блікаў аб'ектыва
 Linear = Лінейны
 Low = Нізкая
+Low latency display = Дыск з нізкай затрымкай
 LowCurves = Якасць сплайнаў і крывых Безье
 LowCurves Tip = Only used by some games, controls smoothness of curves
 Lower resolution for effects (reduces artifacts) = Меншае разрозненне для эфектаў (памяншае артэфакты)

assets/lang/bg_BG.ini

@@ -312,7 +312,6 @@ Enable Logging = Enable debug logging
 Enable shader cache = Enable shader cache
 Enter address = Enter address
 Fast = Fast
-Fast-forward mode = Fast-forward mode
 FPU = FPU
 Fragment = Fragment
 Frame timing = Frame timing
@@ -644,6 +643,7 @@ Device = Устройство
 Direct3D 11 = Direct3D 11
 Disable culling = Disable culling
 Disabled = Disabled
+Display = Дисплей
 Display layout & effects = Оформление и ефекти на дисплея
 Display Resolution (HW scaler) = Display resolution (HW scaler)
 Driver requires Android API version %1, current is %2 = Driver requires Android API version %1, current is %2
@@ -679,6 +679,7 @@ Lazy texture caching Tip = По-бързо, но може да причини п
 Lens flare occlusion = Запушване на отблясъка на обектива
 Linear = Линеарно
 Low = Ниско
+Low latency display = Дисплей с ниска латентност
 LowCurves = Качество на сплайните и кривите на Безие
 LowCurves Tip = Използва се само от някои игри, контролира плавността на кривите
 Lower resolution for effects (reduces artifacts) = По-ниска резолюция за ефекти (намалява артефактите)

assets/lang/ca_ES.ini

@@ -312,7 +312,6 @@ Enable Logging = Activa el registre
 Enable shader cache = Enable shader cache
 Enter address = Inseriu adreça
 Fast = Fast
-Fast-forward mode = Fast-forward mode
 FPU = FPU
 Fragment = Fragment
 Frame timing = Frame timing
@@ -644,6 +643,7 @@ Device = Dispositiu
 Direct3D 11 = Direct3D 11
 Disable culling = Disable culling
 Disabled = Desactivat
+Display = Pantalla
 Display layout & effects = Editor de l'àrea de pantalla
 Display Resolution (HW scaler) = Resolució de pantalla (escalat per maquinari)
 Driver requires Android API version %1, current is %2 = Driver requires Android API version %1, current is %2
@@ -679,6 +679,7 @@ Lazy texture caching Tip = Ràpid, però puc provocar problemes als textos d'alg
 Lens flare occlusion = Lens flare occlusion
 Linear = Lineal
 Low = Baixa
+Low latency display = Pantalla de baixa latència
 LowCurves = Qualitat de corbes Bézier
 LowCurves Tip = Augmenta/redueix significativament el renderitzat de corbes Bézier
 Lower resolution for effects (reduces artifacts) = Efectes en baixa resolució\n(redueix errors gràfics per escalat)

assets/lang/cz_CZ.ini

@@ -312,7 +312,6 @@ Enable Logging = Povolit záznam při ladění
 Enable shader cache = Enable shader cache
 Enter address = Zadejte adresu
 Fast = Fast
-Fast-forward mode = Rychle vpřed
 FPU = FPU
 Fragment = Fragment
 Frame timing = Frame timing
@@ -644,6 +643,7 @@ Device = Device
 Direct3D 11 = Direct3D 11
 Disable culling = Disable culling
 Disabled = Disabled
+Display = Displej
 Display layout & effects = Zobrazit editor rozvržení
 Display Resolution (HW scaler) = Rozlišení obrazovky (Hardwarové zvětšení)
 Driver requires Android API version %1, current is %2 = Driver requires Android API version %1, current is %2
@@ -679,6 +679,7 @@ Lazy texture caching Tip = Faster, but can cause text problems in a few games
 Lens flare occlusion = Lens flare occlusion
 Linear = Lineární
 Low = Nízké
+Low latency display = Displej s nízkou latencí
 LowCurves = Kvalita křivek/Beziérových křivek
 LowCurves Tip = Only used by some games, controls smoothness of curves
 Lower resolution for effects (reduces artifacts) = Nižší rozlišení efektů (snižuje artefakty)

assets/lang/da_DK.ini

@@ -312,7 +312,6 @@ Enable Logging = Aktiver fejlfindingslogning
 Enable shader cache = Enable shader cache
 Enter address = Indtast adresse
 Fast = Fast
-Fast-forward mode = Turbo
 FPU = FPU
 Fragment = Fragment
 Frame timing = Frame timing
@@ -644,6 +643,7 @@ Device = Device
 Direct3D 11 = Direct3D 11
 Disable culling = Disable culling
 Disabled = Disabled
+Display = Skærm
 Display layout & effects = Display layout & effects
 Display Resolution (HW scaler) = Skærmopløsning (HW scaler)
 Driver requires Android API version %1, current is %2 = Driver requires Android API version %1, current is %2
@@ -679,6 +679,7 @@ Lazy texture caching Tip = Faster, but can cause text problems in a few games
 Lens flare occlusion = Lens flare occlusion
 Linear = Lineær
 Low = Lav
+Low latency display = Lav latens display
 LowCurves = Simple spline og bezier-kurver (hurtigere)
 LowCurves Tip = Bruges kun af nogle spil, kontrollerer glathed af kurver
 Lower resolution for effects (reduces artifacts) = Lavere opløsning for effekter (reducerer artefakter)

assets/lang/de_DE.ini

@@ -309,7 +309,6 @@ Enable driver bug workarounds = Treiberfehler-Umgehungen aktivieren
 Enable Logging = Fehlerbehebungs-Protokollierung aktivieren
 Enable shader cache = Schattierer-Cache aktivieren
 Enter address = Adresse eingeben
-Fast-forward mode = Schnellvorlauf-Modus
 FPU = FPU
 Fragment = Fragment
 Frame timing = Einzelbild-Timing
@@ -635,6 +634,7 @@ Device = Gerät
 Direct3D 11 = Direct3D 11
 Disable culling = Culling deaktivieren
 Disabled = Deaktiviert
+Display = Anzeige
 Display layout & effects = Bildschirm-Layout & Effekte
 Display Resolution (HW scaler) = Bildschirmauflösung (HW-Skalierer)
 Driver requires Android API version %1, current is %2 = Treiber erfordert Android-API-Version %1, aktuell ist %2
@@ -670,6 +670,7 @@ Lazy texture caching Tip = Schneller, kann aber in einigen Spielen Textprobleme
 Lens flare occlusion = Verdeckung von Linsenreflexionen
 Linear = Linear
 Low = Niedrig
+Low latency display = Niedriglatenzdisplay
 LowCurves = Spline-/Bezierkurven-Qualität
 LowCurves Tip = Wird nur von einigen Spielen verwendet, es steuert die Glätte von Kurven
 Lower resolution for effects (reduces artifacts) = Niedrigere Auflösung für Effekte (Reduziert Artifakte)

assets/lang/dr_ID.ini

@@ -312,7 +312,6 @@ Enable Logging = Padenni Log
 Enable shader cache = Enable shader cache
 Enter address = Enter address
 Fast = Fast
-Fast-forward mode = Fast-forward mode
 FPU = FPU
 Fragment = Fragment
 Frame timing = Frame timing
@@ -644,6 +643,7 @@ Device = Device
 Direct3D 11 = Direct3D 11
 Disable culling = Disable culling
 Disabled = Disabled
+Display = Tampilan
 Display layout & effects = Display layout & effects
 Display Resolution (HW scaler) = Display resolution (HW scaler)
 Driver requires Android API version %1, current is %2 = Driver requires Android API version %1, current is %2
@@ -679,6 +679,7 @@ Lazy texture caching Tip = Faster, but can cause text problems in a few games
 Lens flare occlusion = Lens flare occlusion
 Linear = Maruruh
 Low = Low
+Low latency display = Tampilan latensi rendah
 LowCurves = Spline/Bezier curves quality
 LowCurves Tip = Only used by some games, controls smoothness of curves
 Lower resolution for effects (reduces artifacts) = Lower resolution for effects (reduces artifacts)

assets/lang/en_US.ini

@@ -338,7 +338,6 @@ Enable Logging = Enable debug logging
 Enable shader cache = Enable shader cache
 Enter address = Enter address
 Fast = Fast
-Fast-forward mode = Fast-forward mode
 Fragment = Fragment
 FPU = FPU
 Framedump tests = Framedump tests
@@ -651,6 +650,7 @@ CPU texture upscaler (slow) = Upscale type
 Current GPU driver = Current GPU driver
 Default GPU driver = Default GPU driver
 Disable culling = Disable culling
+Display = Display
 Display layout & effects = Display layout & effects
 Driver requires Android API version %1, current is %2 = Driver requires Android API version %1, current is %2
 Drivers = Drivers
@@ -703,6 +703,7 @@ Lazy texture caching Tip = Faster, but can cause text problems in a few games
 Lens flare occlusion = Lens flare occlusion
 Linear = Linear
 Low = Low
+Low latency display = Low latency display
 LowCurves = Spline/Bezier curves quality
 LowCurves Tip = Only used by some games, controls smoothness of curves
 Lower resolution for effects (reduces artifacts) = Lower resolution for effects (reduces artifacts)

assets/lang/es_ES.ini

@@ -315,7 +315,6 @@ Enable Logging = Activar registro
 Enable shader cache = Habilitar caché de shaders
 Enter address = Introducir dirección
 Fast = Rápido
-Fast-forward mode = Modo de avance rápido
 FPU = FPU
 Fragment = Fragmentos
 Frame Profiler = Analizador de fotogramas
@@ -645,6 +644,7 @@ Device = Dispositivo
 Direct3D 11 = Direct3D 11
 Disable culling = Desactivar selección
 Disabled = Desactivado
+Display = Pantalla
 Display layout & effects = Distribución de pantalla y efectos
 Display Resolution (HW scaler) = Resolución de pantalla (escalado por hardware)
 Driver requires Android API version %1, current is %2 = El controlador requiere la versión API de Android %1, la versión actual es %2
@@ -680,6 +680,7 @@ Lazy texture caching Tip = Más rápido, pero puede causar problemas de texto en
 Lens flare occlusion = Oclusión por destello de lente
 Linear = Lineal
 Low = Baja
+Low latency display = Pantalla de baja latencia
 LowCurves = Calidad de curvas Spline/Bezier
 LowCurves Tip = Solo lo utilizan algunos juegos, controla la suavidad de las curvas.
 Lower resolution for effects (reduces artifacts) = Resolución más baja para efectos (reduce artefactos)

assets/lang/es_LA.ini

@@ -312,7 +312,6 @@ Enable Logging = Activar registro
 Enable shader cache = Enable shader cache
 Enter address = Insertar dirección
 Fast = Fast
-Fast-forward mode = Modo turbo
 FPU = FPU
 Fragment = Fragment
 Frame timing = Frame timing
@@ -644,6 +643,7 @@ Device = Dispositivo
 Direct3D 11 = Direct3D 11
 Disable culling = Disable culling
 Disabled = Apagado
+Display = Pantalla
 Display layout & effects = Editar pantalla y Shaders
 Display Resolution (HW scaler) = Resolución de pantalla (escalado por HW)
 Driver requires Android API version %1, current is %2 = El controlador requiere la versión de API de Android %1, la actual es %2
@@ -679,6 +679,7 @@ Lazy texture caching Tip = Más rápido, pero puede causar problemas de texto en
 Lens flare occlusion = Lens flare occlusion
 Linear = Lineal
 Low = Baja
+Low latency display = Pantalla de baja latencia
 LowCurves = Calidad de curvas bézier/Spline
 LowCurves Tip = Controla la calidad de las curvas renderizadas, pero solo se utiliza en ciertos juegos.
 Lower resolution for effects (reduces artifacts) = Efectos en baja resolución\n(reduce errores gráficos por escalado)

assets/lang/fa_IR.ini

@@ -312,7 +312,6 @@ Enable Logging = ‎روشن کردن لاگ باگ‌ها
 Enable shader cache = Enable shader cache
 Enter address = وارد کردن ادرس
 Fast = Fast
-Fast-forward mode = Fast-forward mode
 FPU = FPU
 Fragment = Fragment
 Frame timing = Frame timing
@@ -644,6 +643,7 @@ Device = Device
 Direct3D 11 = Direct3D 11
 Disable culling = Disable culling
 Disabled = Disabled
+Display = نمایش
 Display layout & effects = چیدمان صفحه
 Display Resolution (HW scaler) = رزولوشن صفحه
 Driver requires Android API version %1, current is %2 = Driver requires Android API version %1, current is %2
@@ -679,6 +679,7 @@ Lazy texture caching Tip = Faster, but can cause text problems in a few games
 Lens flare occlusion = Lens flare occlusion
 Linear = ‎خطی
 Low = ‎کم
+Low latency display = نمایش با تأخیر کم
 LowCurves = ‎Spline/Bezier کیفیت منحنی‌های
 LowCurves Tip = ‎فقط در تعدادی بازی استفاده میشود، کیفیت منحنی‌ها را کنترل میکند
 Lower resolution for effects (reduces artifacts) = ‎کاهش رزولوشن افکت‌ها (کاهش باگ گرافیکی)

assets/lang/fi_FI.ini

@@ -312,7 +312,6 @@ Enable Logging = Ota virheenkorjauksen kirjaaminen käyttöön
 Enable shader cache = Enable shader cache
 Enter address = Enter address
 Fast = Fast
-Fast-forward mode = Pikakelaus
 FPU = FPU
 Fragment = Fragment
 Frame timing = Frame timing
@@ -644,6 +643,7 @@ Device = Laite
 Direct3D 11 = Direct3D 11
 Disable culling = Poista taustapintojen hylkääminen
 Disabled = Poistettu käytöstä
+Display = Näyttö
 Display layout & effects = Näyttöasettelu ja -efektit
 Display Resolution (HW scaler) = Näyttöresoluutio (Laitteiston skaalaaja)
 Driver requires Android API version %1, current is %2 = Ajurin vaatima Android API -versio on %1, nykyinen versio on %2
@@ -679,6 +679,7 @@ Lazy texture caching Tip = Nopeampi, mutta voi aiheuttaa tekstiongelmia joissaki
 Lens flare occlusion = Lens flare occlusion
 Linear = Lineaarinen
 Low = Matala
+Low latency display = Alhaisen viiveen näyttö
 LowCurves = Spline/Bezier-käyrien laatu
 LowCurves Tip = Käytetään vain joissakin peleissä, ohjaa käyrien sileyttä
 Lower resolution for effects (reduces artifacts) = Alempi resoluutio efekteille (vähentää häiriöitä)

assets/lang/fr_FR.ini

@@ -312,7 +312,6 @@ Enable Logging = Activer le journal de débogage
 Enable shader cache = Enable shader cache
 Enter address = Entrer une adresse
 Fast = Fast
-Fast-forward mode = Vitesse max
 FPU = FPU
 Fragment = Fragment
 Frame timing = Frame timing
@@ -644,6 +643,7 @@ Device = Appareil
 Direct3D 11 = Direct3D 11
 Disable culling = Disable culling
 Disabled = Désactivé
+Display = Affichage
 Display layout & effects = Éditeur d'affichage
 Display Resolution (HW scaler) = Définition d'affichage (mise à l'échelle matérielle)
 Driver requires Android API version %1, current is %2 = Driver requires Android API version %1, current is %2
@@ -679,6 +679,7 @@ Lazy texture caching Tip = Faster, but can cause text problems in a few games
 Lens flare occlusion = Lens flare occlusion
 Linear = Linéaire
 Low = Basse
+Low latency display = Écran à faible latence
 LowCurves = Qualité des courbes de Bézier et splines
 LowCurves Tip = Seulement utilisé par certains jeux, contrôle le lissage des courbes
 Lower resolution for effects (reduces artifacts) = Réduire définition des effets (réduit artéfacts)

assets/lang/gl_ES.ini

@@ -312,7 +312,6 @@ Enable Logging = Activar rexistro
 Enable shader cache = Enable shader cache
 Enter address = Insertar dirección
 Fast = Fast
-Fast-forward mode = Modo turbo
 FPU = FPU
 Fragment = Fragment
 Frame timing = Frame timing
@@ -644,6 +643,7 @@ Device = Device
 Direct3D 11 = Direct3D 11
 Disable culling = Disable culling
 Disabled = Disabled
+Display = Pantalla
 Display layout & effects = Display layout & effects
 Display Resolution (HW scaler) = Resolución de pantalla (escalado por hardware)
 Driver requires Android API version %1, current is %2 = Driver requires Android API version %1, current is %2
@@ -679,6 +679,7 @@ Lazy texture caching Tip = Faster, but can cause text problems in a few games
 Lens flare occlusion = Lens flare occlusion
 Linear = Lineal
 Low = Baixa
+Low latency display = Pantalla de baixa latencia
 LowCurves = Calidade de curvas bézier
 LowCurves Tip = Only used by some games, controls smoothness of curves
 Lower resolution for effects (reduces artifacts) = Lower resolution for effects (reduces artifacts)

assets/lang/gr_EL.ini

@@ -312,7 +312,6 @@ Enable Logging = Ενεργοποίηση καταγραφής αποσφαλμ
 Enable shader cache = Enable shader cache
 Enter address = Διεύθυνση Enter
 Fast = Fast
-Fast-forward mode = Γρήγορη προώθηση
 FPU = FPU
 Fragment = Fragment
 Frame timing = Frame timing
@@ -644,6 +643,7 @@ Device = Device
 Direct3D 11 = Direct3D 11
 Disable culling = Disable culling
 Disabled = Απενεργοποιημένο
+Display = Οθόνη
 Display layout & effects = Επεξεργασία διάταξης οθόνης
 Display Resolution (HW scaler) = Ανάλυση οθόνης (Κλιμακοτής hardware)
 Driver requires Android API version %1, current is %2 = Driver requires Android API version %1, current is %2
@@ -679,6 +679,7 @@ Lazy texture caching Tip = Faster, but can cause text problems in a few games
 Lens flare occlusion = Lens flare occlusion
 Linear = Γραμμικό
 Low = Χαμηλή
+Low latency display = Οθόνη χαμηλής καθυστέρησης
 LowCurves = Ποιότητα καμπυλών spline/bezier
 LowCurves Tip = Αυτή η επιλογή θα βελτιώσει/μειώσει σημαντικά την ποιότητα των παρεχόμενων καμπυλών
 Lower resolution for effects (reduces artifacts) = Χαμηλότερη ανάλυση για εφέ (λιγότερα προβλήματα)

assets/lang/he_IL.ini

@@ -312,7 +312,6 @@ Enable Logging = אפשר דיווח באגים
 Enable shader cache = Enable shader cache
 Enter address = Enter address
 Fast = Fast
-Fast-forward mode = Fast-forward mode
 FPU = FPU
 Fragment = Fragment
 Frame timing = Frame timing
@@ -644,6 +643,7 @@ Device = Device
 Direct3D 11 = Direct3D 11
 Disable culling = Disable culling
 Disabled = Disabled
+Display = תצוגה
 Display layout & effects = Display layout & effects
 Display Resolution (HW scaler) = Display resolution (HW scaler)
 Driver requires Android API version %1, current is %2 = Driver requires Android API version %1, current is %2
@@ -679,6 +679,7 @@ Lazy texture caching Tip = Faster, but can cause text problems in a few games
 Lens flare occlusion = Lens flare occlusion
 Linear = קווי
 Low = Low
+Low latency display = תצוגה עם השהיה נמוכה
 LowCurves = Spline/Bezier curves quality
 LowCurves Tip = Only used by some games, controls smoothness of curves
 Lower resolution for effects (reduces artifacts) = Lower resolution for effects (reduces artifacts)

assets/lang/he_IL_invert.ini

@@ -312,7 +312,6 @@ Enable Logging = םיגאב חוויד רשפא
 Enable shader cache = Enable shader cache
 Enter address = Enter address
 Fast = Fast
-Fast-forward mode = Fast-forward mode
 FPU = FPU
 Fragment = Fragment
 Frame timing = Frame timing
@@ -641,6 +640,7 @@ Device = Device
 Direct3D 11 = Direct3D 11
 Disable culling = Disable culling
 Disabled = Disabled
+Display = תצוגה
 Display layout & effects = Display layout & effects
 Display Resolution (HW scaler) = Display resolution (HW scaler)
 Driver requires Android API version %1, current is %2 = Driver requires Android API version %1, current is %2
@@ -676,6 +676,7 @@ Lazy texture caching Tip = Faster, but can cause text problems in a few games
 Lens flare occlusion = Lens flare occlusion
 Linear = יווק
 Low = Low
+Low latency display = תצוגה עם השהיה נמוכה
 LowCurves = Spline/Bezier curves quality
 LowCurves Tip = Only used by some games, controls smoothness of curves
 Lower resolution for effects (reduces artifacts) = Lower resolution for effects (reduces artifacts)

assets/lang/hr_HR.ini

@@ -312,7 +312,6 @@ Enable Logging = Uključi debug logging
 Enable shader cache = Enable shader cache
 Enter address = Upiši adresu
 Fast = Fast
-Fast-forward mode = Fast-forward mode
 FPU = FPU
 Fragment = Fragment
 Frame timing = Frame timing
@@ -644,6 +643,7 @@ Device = Uređaj
 Direct3D 11 = Direct3D 11
 Disable culling = Disable culling
 Disabled = Isključeno
+Display = Prikaz
 Display layout & effects = Prikaz layout uređivača
 Display Resolution (HW scaler) = Prikaz rezolucije (HW mjeritelj)
 Driver requires Android API version %1, current is %2 = Driver requires Android API version %1, current is %2
@@ -679,6 +679,7 @@ Lazy texture caching Tip = Faster, but can cause text problems in a few games
 Lens flare occlusion = Lens flare occlusion
 Linear = Linearno
 Low = Nisko
+Low latency display = Prikaz s niskom kašnjenjem
 LowCurves = Dugačke/Bezijerove kvalitete zavoja
 LowCurves Tip = Jedino korišteno od strane nekoliko igara, kontrolira uglađenost grafike
 Lower resolution for effects (reduces artifacts) = Snizi rezoluciju za efekte (smanjuje artefakte)

assets/lang/hu_HU.ini

@@ -312,7 +312,6 @@ Enable driver bug workarounds = Enable driver bug workarounds
 Enable shader cache = Enable shader cache
 Enter address = Cím megadása
 Fast = Fast
-Fast-forward mode = Gyorsítás módja
 FPU = FPU
 Fragment = Fragment
 Frame timing = Képkocka időzítés
@@ -644,6 +643,7 @@ Device = Eszköz
 Direct3D 11 = Direct3D 11
 Disable culling = Culling kikapcsolása
 Disabled = Letiltva
+Display = Kijelző
 Display layout & effects = Nézet szerkesztő
 Display Resolution (HW scaler) = Megjelenítési felbontás (HW skálázó)
 Driver requires Android API version %1, current is %2 = A driverhez Android API %1 verzió szükséges, a jelenlegi %2
@@ -679,6 +679,7 @@ Lazy texture caching Tip = Faster, but can cause text problems in a few games
 Lens flare occlusion = Lens flare occlusion
 Linear = Lineáris
 Low = Alacsony
+Low latency display = Alacsony késleltetésű kijelző
 LowCurves = Spline/Bezier görbék minősége
 LowCurves Tip = Csak néhány játék használja, a görbék simaságát szabályozza
 Lower resolution for effects (reduces artifacts) = Alacsonyabb felbontású effektek (artifacteket csökkenti)

assets/lang/id_ID.ini

@@ -312,7 +312,6 @@ Enable Logging = Hidupkan pencatat awakutu
 Enable shader cache = Enable shader cache
 Enter address = Masukkan alamat
 Fast = Fast
-Fast-forward mode = Pemajuan cepat
 FPU = FPU
 Fragment = Fragment
 Frame timing = Waktu bingkai
@@ -644,6 +643,7 @@ Device = Perangkat
 Direct3D 11 = Direct3D 11
 Disable culling = Nonaktifkan pemusnahan
 Disabled = Nonaktif
+Display = Tampilan
 Display layout & effects = Penyesuaian tata letak tampilan
 Display Resolution (HW scaler) = Resolusi tampilan (penskala HW)
 Driver requires Android API version %1, current is %2 = Driver requires Android API version %1, current is %2
@@ -679,6 +679,7 @@ Lazy texture caching Tip = Lebih cepat, tetapi dapat menyebabkan masalah teks di
 Lens flare occlusion = Oklusi silau lensa
 Linear = Linier
 Low = Rendah
+Low latency display = Tampilan latensi rendah
 LowCurves = Kualitas kurva spline/bezier
 LowCurves Tip = Hanya digunakan oleh beberapa permainan, mengontrol kualitas kurva bezier dan spline
 Lower resolution for effects (reduces artifacts) = Resolusi efek lebih rendah (mengurangi artefak)

assets/lang/it_IT.ini

@@ -312,7 +312,6 @@ Enable Logging = Attiva Log del Debug
 Enable shader cache = Abilita cache dello shader
 Enter address = Inserire indirizzo
 Fast = Fast
-Fast-forward mode = Avanti veloce
 FPU = FPU
 Fragment = Frammento
 Frame timing = Temporizzazione frame
@@ -645,6 +644,7 @@ Direct3D 11 = Direct3D 11
 #Disable slower effects (speedup) = Disattiva gli effetti più lenti (veloce)
 Disable culling = Disabilita culling
 Disabled = Disabilitato
+Display = Display
 Display layout & effects = Editor Display
 Display Resolution (HW scaler) = Risoluzione Display (scaler HW)
 Driver requires Android API version %1, current is %2 = Il driver richiede la versione API di Android %1, attualmente c'è la %2
@@ -680,6 +680,7 @@ Lazy texture caching Tip = Veloce, ma può causare problemi di testo in alcuni g
 Lens flare occlusion = Occlusione lens flare
 Linear = Lineare
 Low = Bassa
+Low latency display = Display a bassa latenza
 LowCurves = Riduci qualità splines e curve di bezier (maggior velocità)
 LowCurves Tip = Usato solo in alcuni giochi, controlla la fluidità delle curve
 Lower resolution for effects (reduces artifacts) = Bassa risoluzione degli effetti (riduce gli artefatti)

assets/lang/ja_JP.ini

@@ -312,7 +312,6 @@ Enable Logging = デバッグログを有効にする
 Enable shader cache = シェーダーキャッシュを有効にする
 Enter address = アドレスを入力する
 Fast = 速い
-Fast-forward mode = 速度制限を解除
 FPU = FPU
 Fragment = フラグメント
 Frame timing = フレームタイミング
@@ -644,6 +643,7 @@ Device = デバイス
 Direct3D 11 = Direct3D 11
 Disable culling = カリングを無効化
 Disabled = 無効
+Display = ディスプレイ
 Display layout & effects = 画面のレイアウトを編集する
 Display Resolution (HW scaler) = 画面解像度 (HWスケーラー)
 Driver requires Android API version %1, current is %2 = ドライバーはAndroid API version %1を要求していますが, 現在 %2です
@@ -679,6 +679,7 @@ Lazy texture caching Tip = 高速化するがいくつかのゲームでテキ
 Lens flare occlusion = レンズフレア表現への遮蔽処理
 Linear = Linear
 Low = 低
+Low latency display = 低遅延ディスプレイ
 LowCurves = スプライン/ベジェ曲線の品質
 LowCurves Tip = いくつかのゲームでのみ用いられ、曲線の滑らかさをコントロールする
 Lower resolution for effects (reduces artifacts) = エフェクトを低解像度にする (生成物を減らす)

assets/lang/jv_ID.ini

@@ -312,7 +312,6 @@ Enable Logging = Ngatifke ngangkut barang
 Enable shader cache = Enable shader cache
 Enter address = Ketik alamat
 Fast = Fast
-Fast-forward mode = Fast-forward mode
 FPU = FPU
 Fragment = Fragment
 Frame timing = Frame timing
@@ -644,6 +643,7 @@ Device = Device
 Direct3D 11 = Direct3D 11
 Disable culling = Disable culling
 Disabled = Disabled
+Display = Tampilan
 Display layout & effects = Tata letak Tampilan editor
 Display Resolution (HW scaler) = Resolusi tampilan (HW scaler)
 Driver requires Android API version %1, current is %2 = Driver requires Android API version %1, current is %2
@@ -679,6 +679,7 @@ Lazy texture caching Tip = Faster, but can cause text problems in a few games
 Lens flare occlusion = Lens flare occlusion
 Linear = Linear
 Low = Kurang
+Low latency display = Layang latensi rendah
 LowCurves = Kualitas kurva Spline/Bezier
 LowCurves Tip = Only used by some games, controls smoothness of curves
 Lower resolution for effects (reduces artifacts) = Resolusi ngisor kanggo efek (nyuda artefak)

assets/lang/ko_KR.ini

@@ -314,7 +314,6 @@ Enable Logging = 디버그 로깅 활성화
 Enable shader cache = 셰이더 캐시 활성화
 Enter address = 주소 입력
 Fast = 빠름
-Fast-forward mode = 빨리 감기
 Fragment = 단편
 FPU = FPU
 Framedump tests = 프레임 덤프 테스트
@@ -627,6 +626,7 @@ CPU texture upscaler (slow) = 업스케일 유형
 Current GPU driver = 현재 GPU 드라이버
 Default GPU driver = 기본 GPU 드라이버
 Disable culling = 컬링 비활성화
+Display = 디스플레이
 Display layout & effects = 화면 레이아웃 편집기
 Driver requires Android API version %1, current is %2 = 드라이버에는 안드로이드 API 버전 %1이(가) 필요하며, 현재는 %2입니다.
 Drivers = 드라이버
@@ -679,6 +679,7 @@ Lazy texture caching Tip = 더 빠르지만 몇몇 게임에서 텍스트 문제
 Lens flare occlusion = 렌즈 플레어 차단
 Linear = 선형 필터링
 Low = 낮음
+Low latency display = 낮은 지연 시간 디스플레이
 LowCurves = 스플라인/베지어 곡선 품질
 LowCurves Tip = 일부 게임에서만 사용되며, 곡선의 부드러움을 제어
 Lower resolution for effects (reduces artifacts) = 효과에 대한 낮은 해상도 (인공물 감소)

assets/lang/ku_SO.ini

@@ -328,7 +328,6 @@ Enable Logging = Enable debug logging
 Enable shader cache = Enable shader cache
 Enter address = Enter address
 Fast = Fast
-Fast-forward mode = Fast-forward mode
 Fragment = Fragment
 FPU = FPU
 Framedump tests = Framedump tests
@@ -641,6 +640,7 @@ CPU texture upscaler (slow) = Upscale type
 Current GPU driver = Current GPU driver
 Default GPU driver = Default GPU driver
 Disable culling = Disable culling
+Display = Nîşan
 Display layout & effects = Display layout & effects
 Driver requires Android API version %1, current is %2 = Driver requires Android API version %1, current is %2
 Drivers = Drivers
@@ -693,6 +693,7 @@ Lazy texture caching Tip = Faster, but can cause text problems in a few games
 Lens flare occlusion = Lens flare occlusion
 Linear = Linear
 Low = Low
+Low latency display = Pêşangeha bi derfeta jê
 LowCurves = Spline/Bezier curves quality
 LowCurves Tip = Only used by some games, controls smoothness of curves
 Lower resolution for effects (reduces artifacts) = Lower resolution for effects (reduces artifacts)

assets/lang/lo_LA.ini

@@ -312,7 +312,6 @@ Enable Logging = ເປີດໃຊ້ງານ logging
 Enable shader cache = Enable shader cache
 Enter address = ໃສ່ຄ່າທີ່ຢູ່
 Fast = Fast
-Fast-forward mode = ເລັ່ງເທີໂບ
 FPU = FPU
 Fragment = Fragment
 Frame timing = Frame timing
@@ -644,6 +643,7 @@ Device = Device
 Direct3D 11 = Direct3D 11
 Disable culling = Disable culling
 Disabled = Disabled
+Display = ສະແດງ
 Display layout & effects = ແກ້ໄຂຮູບແບບໜ້າຈໍ
 Display Resolution (HW scaler) = ຄວາມລະອຽດໜ້າຈໍ (ຕາມຮາດແວຣ໌)
 Driver requires Android API version %1, current is %2 = Driver requires Android API version %1, current is %2
@@ -679,6 +679,7 @@ Lazy texture caching Tip = Faster, but can cause text problems in a few games
 Lens flare occlusion = Lens flare occlusion
 Linear = Linear
 Low = ຕ່ຳ
+Low latency display = ການສະແດງທີ່ມີລາຍການສະຫຼຸບແລະສົທານ
 LowCurves = ລະດັບເສັ້ນສອງມິຕິ ຫຼື ເສັ້ນໂຄ້ງ
 LowCurves Tip = ໃຊ້ສະເພາະບາງເກມ, ເພື່ອຄວບຄຸມຄວາມມື່ນໄຫຼຂອງເສັ້ນໂຄ້ງ
 Lower resolution for effects (reduces artifacts) = ຫຼຸດຄວາມລະອຽດຂອງເອັບເຟກໃຫ້ຕ່ຳລົງ (ແກ້ພາບແຈ້ງ)

assets/lang/lt-LT.ini

@@ -312,7 +312,6 @@ Enable Logging = Įjungti testinio režimo statuso rašymą į failus
 Enable shader cache = Enable shader cache
 Enter address = Enter address
 Fast = Fast
-Fast-forward mode = Fast-forward mode
 FPU = FPU
 Fragment = Fragment
 Frame timing = Frame timing
@@ -644,6 +643,7 @@ Device = Device
 Direct3D 11 = Direct3D 11
 Disable culling = Disable culling
 Disabled = Disabled
+Display = Ekranas
 Display layout & effects = Display layout & effects
 Display Resolution (HW scaler) = Ekrano rezoliucija ("HW" ištiesinimas)
 Driver requires Android API version %1, current is %2 = Driver requires Android API version %1, current is %2
@@ -679,6 +679,7 @@ Lazy texture caching Tip = Faster, but can cause text problems in a few games
 Lens flare occlusion = Lens flare occlusion
 Linear = Linijinis
 Low = Žema
+Low latency display = Žema uždelsimo ekranas
 LowCurves = "Spline/Bezier" lankstumų kokybė
 LowCurves Tip = Only used by some games, controls smoothness of curves
 Lower resolution for effects (reduces artifacts) = Lower resolution for effects (reduces artifacts)

assets/lang/ms_MY.ini

@@ -312,7 +312,6 @@ Enable Logging = Upayakan log pepijat
 Enable shader cache = Enable shader cache
 Enter address = Enter address
 Fast = Fast
-Fast-forward mode = Fast-forward mode
 FPU = FPU
 Fragment = Fragment
 Frame timing = Frame timing
@@ -644,6 +643,7 @@ Device = Device
 Direct3D 11 = Direct3D 11
 Disable culling = Disable culling
 Disabled = Disabled
+Display = Paparan
 Display layout & effects = Display layout & effects
 Display Resolution (HW scaler) = Display resolution (HW scaler)
 Driver requires Android API version %1, current is %2 = Driver requires Android API version %1, current is %2
@@ -679,6 +679,7 @@ Lazy texture caching Tip = Faster, but can cause text problems in a few games
 Lens flare occlusion = Lens flare occlusion
 Linear = Garis dekat
 Low = Low
+Low latency display = Paparan latensi rendah
 LowCurves = Kualiti rendah splin dan keluk bezier (tingkatkan kelajuan)
 LowCurves Tip = Only used by some games, controls smoothness of curves
 Lower resolution for effects (reduces artifacts) = Lower resolution for effects (reduces artifacts)

assets/lang/nl_NL.ini

@@ -312,7 +312,6 @@ Enable Logging = Foutlogboek inschakelen
 Enable shader cache = Enable shader cache
 Enter address = Adres invoeren
 Fast = Fast
-Fast-forward mode = Versnellen
 FPU = FPU
 Fragment = Fragment
 Frame timing = Frame timing
@@ -644,6 +643,7 @@ Device = Device
 Direct3D 11 = Direct3D 11
 Disable culling = Disable culling
 Disabled = Disabled
+Display = Display
 Display layout & effects = Schermweergave bewerken
 Display Resolution (HW scaler) = Schermresolutie (hardware)
 Driver requires Android API version %1, current is %2 = Driver requires Android API version %1, current is %2
@@ -679,6 +679,7 @@ Lazy texture caching Tip = Faster, but can cause text problems in a few games
 Lens flare occlusion = Lens flare occlusion
 Linear = Lineair
 Low = Laag
+Low latency display = Laag-latentie-display
 LowCurves = Kwaliteit spline- en béziercurves
 LowCurves Tip = Alleen gebruikt in sommige games, bestuurt de afronding van curves
 Lower resolution for effects (reduces artifacts) = Effectresolutie verlagen (minder objecten)

assets/lang/no_NO.ini

@@ -312,7 +312,6 @@ Enable Logging = Debugloggning
 Enable shader cache = Enable shader cache
 Enter address = Enter address
 Fast = Fast
-Fast-forward mode = Fast-forward mode
 FPU = FPU
 Fragment = Fragment
 Frame timing = Frame timing
@@ -644,6 +643,7 @@ Device = Device
 Direct3D 11 = Direct3D 11
 Disable culling = Disable culling
 Disabled = Disabled
+Display = Skjerm
 Display layout & effects = Display layout & effects
 Display Resolution (HW scaler) = Display resolution (HW scaler)
 Driver requires Android API version %1, current is %2 = Driver requires Android API version %1, current is %2
@@ -679,6 +679,7 @@ Lazy texture caching Tip = Faster, but can cause text problems in a few games
 Lens flare occlusion = Lens flare occlusion
 Linear = Lineær
 Low = Low
+Low latency display = Lav latens skjerm
 LowCurves = Spline/Bezier curves quality
 LowCurves Tip = Only used by some games, controls smoothness of curves
 Lower resolution for effects (reduces artifacts) = Lower resolution for effects (reduces artifacts)

assets/lang/pl_PL.ini

@@ -311,7 +311,6 @@ Enable Logging = Włącz dziennik zdarzeń debugera
 Enable shader cache = Włącz pamięć podręczną shaderów
 Enter address = Wprowadź adres
 Fast = Szybka
-Fast-forward mode = Pełna prędkość
 FPU = FPU
 Fragment = Fragmentu
 Frame timing = Czasy klatek
@@ -645,6 +644,7 @@ Device = Urządzenie
 Direct3D 11 = Direct3D 11
 Disable culling = Wyłącz przycinanie
 Disabled = Wył.
+Display = Wyświetlacz
 Display layout & effects = Edytor położenia obrazu
 Display Resolution (HW scaler) = Rozdzielczość ekranu (skaler sprz.)
 Driver requires Android API version %1, current is %2 = Sterownik wymaga wersji %1 Android API, aktualna wersja to %2
@@ -675,6 +675,7 @@ Lazy texture caching Tip = Szybsze, ale może powodować problemy z tekstem/napi
 Lens flare occlusion = Okluzja flary (halacji) obiektywu
 Linear = Liniowe
 Low = Niskie
+Low latency display = Ekran o niskiej latencji
 LowCurves = Detale krzywych sklejanych/Beziera (przyśpieszenie)
 LowCurves Tip = Używane tylko przez niektóre gry, kontroluje gładkość krzywych
 Lower resolution for effects (reduces artifacts) = Zmniejszenie rozdzielczość efektów (mniej błędów)

assets/lang/pt_BR.ini

@@ -338,7 +338,6 @@ Enable Logging = Ativar o registro do debug
 Enable shader cache = Enable shader cache
 Enter address = Inserir endereço
 Fast = Rápido
-Fast-forward mode = Modo de avanço rápido
 Fragment = Fragmento
 FPU = FPU
 Framedump tests = Testes dos dumps dos frames
@@ -650,6 +649,7 @@ CPU texture upscaler (slow) = Tipo de ampliação
 Current GPU driver = Driver da GPU Atual
 Default GPU driver = Driver padrão da GPU
 Disable culling = Desativar o culling
+Display = Tela
 Display layout & effects = Ajustar a tela & efeitos
 Driver requires Android API version %1, current is %2 = O driver requer a versão %1 da API do Android, a atual é %2
 Drivers = Drivers
@@ -702,6 +702,7 @@ Lazy texture caching Tip = Mais rápido mas pode causar problemas para carregar
 Lens flare occlusion = Oclusão da luz da lente
 Linear = Linear
 Low = Baixa
+Low latency display = Display de baixa latência
 LowCurves = Qualidade das curvas spline/bezier
 LowCurves Tip = Usado só por alguns jogos, controla a suavidade das curvas
 Lower resolution for effects (reduces artifacts) = Resolução menor para efeitos (reduz artefatos)

assets/lang/pt_PT.ini

@@ -336,7 +336,6 @@ Enable Logging = Ativar Log do Debug
 Enable shader cache = Enable shader cache
 Enter address = Inserir endereço
 Fast = Fast
-Fast-forward mode = Avanço rápido
 FPU = FPU
 Fragment = Fragmento
 Frame timing = Tempo do frame
@@ -668,6 +667,7 @@ Device = Dispositivo
 Direct3D 11 = Direct3D 11
 Disable culling = Disable culling
 Disabled = Desativado
+Display = Ecrã
 Display layout & effects = Mostrar o editor dos esquemas
 Display Resolution (HW scaler) = Resolução da tela (Dimensionador do hardware)
 Driver requires Android API version %1, current is %2 = Driver requires Android API version %1, current is %2
@@ -703,6 +703,7 @@ Lazy texture caching Tip = Mais rápido, mas pode causar problemas no texto em a
 Lens flare occlusion = Lens flare occlusion
 Linear = Linear
 Low = Baixa
+Low latency display = Ecrã de baixa latência
 LowCurves = Qualidade das curvas spline/bezier
 LowCurves Tip = Usado só em alguns jogos, controla a suavidade das curvas
 Lower resolution for effects (reduces artifacts) = Menor Resolução dos efeitos (reduz artefatos)

assets/lang/ro_RO.ini

@@ -313,7 +313,6 @@ Enable Logging = Enable debug logging
 Enable shader cache = Enable shader cache
 Enter address = Enter address
 Fast = Fast
-Fast-forward mode = Repede inainte
 FPU = FPU
 Fragment = Fragment
 Frame timing = Frame timing
@@ -645,6 +644,7 @@ Device = Device
 Direct3D 11 = Direct3D 11
 Disable culling = Disable culling
 Disabled = Disabled
+Display = Display
 Display layout & effects = Display layout & effects
 Display Resolution (HW scaler) = Rezoluție ecran (scalare HW)
 Driver requires Android API version %1, current is %2 = Driver requires Android API version %1, current is %2
@@ -680,6 +680,7 @@ Lazy texture caching Tip = Faster, but can cause text problems in a few games
 Lens flare occlusion = Lens flare occlusion
 Linear = Linear
 Low = Jos
+Low latency display = Ecran cu latență scăzută
 LowCurves = Calitate curbe Spline/Bezier
 LowCurves Tip = Only used by some games, controls smoothness of curves
 Lower resolution for effects (reduces artifacts) = Rezoluții mai mici pt. efecte (reduce artefacte)

assets/lang/ru_RU.ini

@@ -312,7 +312,6 @@ Enable Logging = Включить отладочное логирование
 Enable shader cache = Включить кэш шейдеров
 Enter address = Ввести адрес
 Fast = Быстро
-Fast-forward mode = Перемотка вперёд
 FPU = FPU
 Fragment = Фрагмент
 Frame timing = Время кадра
@@ -644,6 +643,7 @@ Device = Устройство
 Direct3D 11 = Direct3D 11
 Disable culling = Отключить отбраковку
 Disabled = Откл.
+Display = Дисплей
 Display layout & effects = Расположение экрана и эффектов
 Display Resolution (HW scaler) = Разрешение экрана (аппаратное)
 Driver requires Android API version %1, current is %2 = Для драйвера требуется Android API версии %1, текущая - %2
@@ -679,6 +679,7 @@ Lazy texture caching Tip = Быстрее, но может вызвать про
 Lens flare occlusion = Окклюзия бликов объектива
 Linear = Линейный
 Low = Низкое
+Low latency display = Дисплей с низкой задержкой
 LowCurves = Качество сплайнов и кривых Безье
 LowCurves Tip = Используется в некоторых играх, влияет на плавность кривых
 Lower resolution for effects (reduces artifacts) = Эффекты низкого качества (меньше артефактов)

assets/lang/sv_SE.ini

@@ -312,7 +312,6 @@ Enable Logging = Felsökningsloggning
 Enable shader cache = Enable shader cache
 Enter address = Adress
 Fast = Snabb
-Fast-forward mode = Snabbspola
 FPU = FPU
 Fragment = Fragment
 Frame timing = Frame timing
@@ -645,6 +644,7 @@ Device = Enhet
 Direct3D 11 = Direct3D 11
 Disable culling = Inaktivera klippning
 Disabled = Avstängd
+Display = Skärm
 Display layout & effects = Skärmlayout och effekter
 Display Resolution (HW scaler) = Skärmupplösning (HW scaler)
 Driver requires Android API version %1, current is %2 = Drivrutinen kräver Android-API-version %1, nuvarande är %2
@@ -680,6 +680,7 @@ Lazy texture caching Tip = Snabbare, men kan orsaka problem med text i vissa spe
 Lens flare occlusion = Linsljus-blockering
 Linear = Linjär
 Low = Låg
+Low latency display = Låg latens visning
 LowCurves = Spline/Bezier-kvalitet
 LowCurves Tip = Only used by some games, controls smoothness of curves
 Lower resolution for effects (reduces artifacts) = Lägre upplösning för effekter (bättre kvalitet)

assets/lang/tg_PH.ini

@@ -313,7 +313,6 @@ Enable Logging = Paganahin ang Debug Logging
 Enable shader cache = Enable shader cache
 Enter address = Ilagay ang address
 Fast = Fast
-Fast-forward mode = Fast-forward mode
 FPU = FPU
 Fragment = Fragment
 Frame timing = Timing ng frame
@@ -645,6 +644,7 @@ Device = Device
 Direct3D 11 = Direct3D 11
 Disable culling = Disable culling
 Disabled = Disabled
+Display = Намоиш
 Display layout & effects = Display layout & effects
 Display Resolution (HW scaler) = Display resolution (HW scaler)
 Driver requires Android API version %1, current is %2 = Driver requires Android API version %1, current is %2
@@ -680,6 +680,7 @@ Lazy texture caching Tip = Faster, but can cause text problems in a few games
 Lens flare occlusion = Lens flare occlusion
 Linear = Linyar
 Low = Low
+Low latency display = Дисплей бо таъхир
 LowCurves = Mababang kalidad ng splines at bezier curves (pampa-bilis)
 LowCurves Tip = Only used by some games, controls smoothness of curves
 Lower resolution for effects (reduces artifacts) = Lower resolution for effects (reduces artifacts)

assets/lang/th_TH.ini

@@ -317,7 +317,6 @@ Enable driver bug workarounds = เปิดใช้งานการแก้
 Enable shader cache = เปิดการใช้งานเฉดเดอร์แคช
 Enter address = ใส่ค่าที่อยู่
 Fast = เร็ว
-Fast-forward mode = โหมดการเร่งความเร็ว
 Flush the trace = ล้างการติดตาม
 Force-enable HLE = บังคับเปิดใช้งานโมดูล HLE
 FPU = FPU
@@ -661,6 +660,7 @@ Device = การ์ดจอ
 Direct3D 11 = ไดเร็คท์ 3D 11
 Disable culling = ปิดการใช้งาน culling
 Disabled = ปิดการใช้งาน
+Display = แสดงผล
 Display layout & effects = รูปแบบหน้าจอ และเอฟเฟ็คท์
 Display Resolution (HW scaler) = ความละเอียดหน้าจอ (ตามฮาร์ดแวร์)
 Driver requires Android API version %1, current is %2 = ไดรเวอร์นี้ต้องการแอนดรอยด์ API ที่เวอร์ชั่น %1, แต่มือถือนี้ใช้เวอร์ชั่น %2
@@ -697,6 +697,7 @@ Lazy texture caching Tip = เร็วขึ้น แต่อาจจะท
 Lens flare occlusion = การบดบังแสงเลนส์แฟลร์
 Linear = แบบเชิงเส้น
 Low = ต่ำ
+Low latency display = จอแสดงผลการหน่วงเวลาต่ำ
 LowCurves = ระดับของเส้นโค้ง Spline/Bezier
 LowCurves Tip = ใช้แค่ในบางเกม ช่วยปรับคุณภาพของเส้นโค้งให้มีความเรียบเนียนขึ้น
 Lower resolution for effects (reduces artifacts) = ลดความละเอียดของเอฟเฟ็คต์ให้ต่ำลง (ลดขอบภาพสว่าง)

assets/lang/tr_TR.ini

@@ -314,7 +314,6 @@ Enable Logging = Hata Ayıklama Günlüğünü Etkinleştir
 Enable shader cache = Gölgelendirici önbelleğini etkinleştir
 Enter address = Adres Gir
 Fast = Hızlı
-Fast-forward mode = Hızlı ileri Sarma Modu
 FPU = FPU
 Fragment = Parça
 Frame timing = Kare Zamanlaması
@@ -646,6 +645,7 @@ Device = Cihaz
 Direct3D 11 = Direct3D 11
 Disable culling = Ayıklamayı Devre Dışı Bırak
 Disabled = Devre Dışı
+Display = Ekran
 Display layout & effects = Ekran Düzeni ve Efektleri
 Display Resolution (HW scaler) = Görüntü Çözünürlüğü (HW ölçek)
 Driver requires Android API version %1, current is %2 = Sürücü, Android API'nin %1 sürümünü gerektiriyor, şu anki sürüm %2
@@ -681,6 +681,7 @@ Lazy texture caching Tip = Daha hızlıdır ancak bazı oyunlarda yazılarda sor
 Lens flare occlusion = Lens parlaması tıkanıklığı
 Linear = Doğrusal
 Low = Düşük
+Low latency display = Düşük gecikme ekranı
 LowCurves = Düşük Eğriler
 LowCurves Tip = Sadece bazı oyunlar tarafından kullanılır, eğrilerin pürüzsüzlüğünü kontrol eder
 Lower resolution for effects (reduces artifacts) = Efektler İçin Düşük Çözünürlük (sorunları azaltır)

assets/lang/uk_UA.ini

@@ -312,7 +312,6 @@ Enable Logging = Ввімкнути логування
 Enable shader cache = Enable shader cache
 Enter address = Введіть адресу
 Fast = Швидко
-Fast-forward mode = Швидко вперед
 FPU = FPU
 Fragment = Фрагмент
 Frame timing = Хронометраж кадру
@@ -644,6 +643,7 @@ Device = Пристрій
 Direct3D 11 = Direct3D 11
 Disable culling = Вимкнути вибракування
 Disabled = Вимкнено
+Display = Відображення
 Display layout & effects = Редактор розташування екрану
 Display Resolution (HW scaler) = Розширення екрану (HW масштабування)
 Driver requires Android API version %1, current is %2 = Драйвер вимагає Андроїд API версію %1, поточна %2
@@ -679,6 +679,7 @@ Lazy texture caching Tip = Швидше, але може спричинити п
 Lens flare occlusion = Оклюзія відблисків об'єктива
 Linear = Лінійний
 Low = Низька
+Low latency display = Дисплей з низькою затримкою
 LowCurves = Якість сплайну
 LowCurves Tip = Використовується лише в деяких іграх, контролюючи плавність кривих
 Lower resolution for effects (reduces artifacts) = Ефекти низької якості (зменшує артефакти)

assets/lang/vi_VN.ini

@@ -312,7 +312,6 @@ Enable Logging = Cho phép ghi nhật ký debug
 Enable shader cache = Enable shader cache
 Enter address = Nhập địa chỉ
 Fast = Fast
-Fast-forward mode = Fast-forward mode
 FPU = FPU
 Fragment = Fragment
 Frame timing = Frame timing
@@ -644,6 +643,7 @@ Device = Thiết bị
 Direct3D 11 = Direct3D 11
 Disable culling = Disable culling
 Disabled = Vô hiệu hóa
+Display = Hiển thị
 Display layout & effects = Chỉnh bố trí hiển thị
 Display Resolution (HW scaler) = Độ phân giải màn hình (HW scaler)
 Driver requires Android API version %1, current is %2 = Driver requires Android API version %1, current is %2
@@ -679,6 +679,7 @@ Lazy texture caching Tip = Faster, but can cause text problems in a few games
 Lens flare occlusion = Lens flare occlusion
 Linear = Tuyến tính
 Low = Thấp
+Low latency display = Màn hình độ trễ thấp
 LowCurves = Đường cong Spline/bezier chất lượng thấp (tăng tốc)
 LowCurves Tip = Chỉ được sử dụng bởi một số trò chơi, kiểm soát độ mượt của đường cong.
 Lower resolution for effects (reduces artifacts) = Độ phân giải thấp cho các hiệu ứng (làm giảm vật thể)

assets/lang/zh_CN.ini

@@ -312,7 +312,6 @@ Enable Logging = 启用调试日志
 Enable shader cache = 启用着色器缓存
 Enter address = 输入地址
 Fast = 快速
-Fast-forward mode = 加速键的工作模式
 FPU = FPU
 Fragment = 片段着色器
 Frame timing = 帧时间统计信息
@@ -644,6 +643,7 @@ Device = 设备
 Direct3D 11 = Direct3D 11
 Disable culling = 关闭遮挡剔除 (修复模型错误)
 Disabled = 禁用
+Display = 显示
 Display layout & effects = 屏幕布局和滤镜
 Display Resolution (HW scaler) = 屏幕分辨率
 Driver requires Android API version %1, current is %2 = 驱动需要Android API版本 %1, 目前系统版本为%2
@@ -679,6 +679,7 @@ Lazy texture caching Tip = 速度更快，并使部分游戏文字渲染出错
 Lens flare occlusion = 镜头眩光遮挡
 Linear = 线性过滤
 Low = 低质量
+Low latency display = 低延迟显示
 LowCurves = 贝塞尔曲线质量 (提速)
 LowCurves Tip = 调整曲线的绘制质量，只有少数游戏适用此设置
 Lower resolution for effects (reduces artifacts) = 降低特效分辨率 (修复光晕效果)

assets/lang/zh_TW.ini

@@ -312,7 +312,6 @@ Enable Logging = 啟用偵錯記錄
 Enable shader cache = 啟用著色器快取
 Enter address = 輸入位址
 Fast = 快速
-Fast-forward mode = 快轉模式
 FPU = FPU
 Fragment = 片段
 Frame timing = 影格計時
@@ -644,6 +643,7 @@ Device = 裝置
 Direct3D 11 = Direct3D 11
 Disable culling = 停用揀選
 Disabled = 已停用
+Display = 顯示
 Display layout & effects = 顯示版面配置與效果
 Display Resolution (HW scaler) = 顯示解析度 (硬體縮放)
 Driver requires Android API version %1, current is %2 = 驅動程式需要 Android API 版本為 %1，目前為 %2
@@ -679,6 +679,7 @@ Lazy texture caching Tip = 更快，但在某些遊戲中可能會造成文字
 Lens flare occlusion = 鏡頭眩光遮蔽
 Linear = 線性
 Low = 低
+Low latency display = 低延遲顯示
 LowCurves = 曲線/貝茲曲線品質
 LowCurves Tip = 僅供少數遊戲使用，控制曲線平滑度
 Lower resolution for effects (reduces artifacts) = 降低效果解析度 (降低失真)

headless/Headless.cpp

@@ -536,7 +536,6 @@ int main(int argc, const char* argv[])
 	g_Config.iButtonPreference = PSP_SYSTEMPARAM_BUTTON_CROSS;
 	g_Config.iLockParentalLevel = 9;
 	g_Config.iInternalResolution = 1;
-	g_Config.iFastForwardMode = (int)FastForwardMode::CONTINUOUS;
 	g_Config.bEnableLogging = (fullLog || outputDebugStringLog);
 	g_Config.bSoftwareSkinning = true;
 	g_Config.bVertexDecoderJit = true;

ios/ViewControllerMetal.mm

@@ -77,8 +77,16 @@ bool IOSVulkanContext::InitFromRenderThread(CAMetalLayer *layer, int desiredBack
 		return false;
 	}
 
-	VkPresentModeKHR presentMode = ConfigPresentModeToVulkan();
+	bool useMultiThreading = g_Config.bRenderMultiThreading;
+	if (g_Config.iInflightFrames == 1) {
+		useMultiThreading = false;
+	}
+
+	draw_ = Draw::T3DCreateVulkanContext(g_Vulkan, useMultiThreading);
+
+	VkPresentModeKHR presentMode = ConfigPresentModeToVulkan(draw_);
 	if (!g_Vulkan->InitSwapchain(presentMode)) {
+		delete draw_;
 		ERROR_LOG(Log::G3D, "InitSwapchain failed");
 		g_Vulkan->DestroySwapchain();
 		g_Vulkan->DestroySurface();
@@ -87,12 +95,6 @@ bool IOSVulkanContext::InitFromRenderThread(CAMetalLayer *layer, int desiredBack
 		return false;
 	}
 
-	bool useMultiThreading = g_Config.bRenderMultiThreading;
-	if (g_Config.iInflightFrames == 1) {
-		useMultiThreading = false;
-	}
-
-	draw_ = Draw::T3DCreateVulkanContext(g_Vulkan, useMultiThreading);
 	SetGPUBackend(GPUBackend::VULKAN);
 	bool shaderSuccess = draw_->CreatePresets();  // Doesn't fail, we ship the compiler.
 	_assert_msg_(shaderSuccess, "Failed to compile preset shaders");
@@ -131,7 +133,7 @@ void IOSVulkanContext::Resize() {
 	g_Vulkan->DestroySwapchain();
 	g_Vulkan->DestroySurface();
 	g_Vulkan->ReinitSurface();
-	VkPresentModeKHR presentMode = ConfigPresentModeToVulkan();
+	VkPresentModeKHR presentMode = ConfigPresentModeToVulkan(draw_);
 	g_Vulkan->InitSwapchain(presentMode);
 	draw_->HandleEvent(Draw::Event::GOT_BACKBUFFER, g_Vulkan->GetBackbufferWidth(), g_Vulkan->GetBackbufferHeight());
 	INFO_LOG(Log::G3D, "IOSVulkanContext::Resize end (final size: %dx%d)", g_Vulkan->GetBackbufferWidth(), g_Vulkan->GetBackbufferHeight());

libretro/LibretroVulkanContext.cpp

@@ -139,6 +139,7 @@ void LibretroVulkanContext::CreateDrawContext() {
       useMultiThreading = false;
    }
    draw_ = Draw::T3DCreateVulkanContext(vk, useMultiThreading);
+
    ((VulkanRenderManager*)draw_->GetNativeObject(Draw::NativeObject::RENDER_MANAGER))->SetInflightFrames(g_Config.iInflightFrames);
    SetGPUBackend(GPUBackend::VULKAN);
 }